Do you have a question about the Kenwood KDC-MP625 and is the answer not in the manual?
frequency range | 87.9 MHz – 107.9 MHz |
---|---|
usable sensitivity | 9.3dBf (0.8 µV /75 Ω) |
quieting sensitivity | 15.2dBf (1.6 µV /75 Ω) |
frequency response | 30 Hz – 15 kHz |
signal to noise ratio | 70 dB |
selectivity | ≥ 80 dB |
stereo separation | 40 dB |
frequency range | 530 kHz – 1700 kHz |
---|---|
usable sensitivity | 28 dBµ (25 µV) |
laser diode | GaAlAs |
---|---|
digital filter | 8 Times Over Sampling |
d/a converter | 1 Bit |
spindle speed | 1000 – 400 rpm (CLV 2times) |
frequency response | 10 Hz – 20 kHz |
total harmonic distortion (KDC-X679) | 0.008 % |
total harmonic distortion (KDC-MP6025/MP625) | 0.01 % |
signal to noise ratio (KDC-X679) | 106 dB |
signal to noise ratio (KDC-MP6025/MP625) | 105 dB |
dynamic range | 93 dB |
channel separation | 96 dB |
maximum output power | 50 W x 4 |
---|---|
full bandwidth power | 22 W x 4 |
tone action bass | 100 Hz ±10 dB |
tone action middle | 1 kHz ±10 dB |
tone action treble | 10 kHz ±10 dB |
preout level/load (KDC-X679) | 5000 mV/10 kΩ |
preout level/load (KDC-MP6025/MP625) | 2000 mV/10 kΩ |
preout impedance (KDC-X679) | ≤80 Ω |
preout impedance (KDC-MP6025/MP625) | ≤600 kΩ |
operating voltage | 14.4 V |
---|---|
current consumption | 10 A |
installation size | 7-3/16 x 2-1/16 x 6-1/10 inch (182 x 53 x 155 mm) |
weight | 3.1 lbs (1.4 kg) |
Essential safety precautions regarding hazardous radiation exposure and FCC regulations.
Important notes on equipment use, modifications, and potential interference.
Critical warnings to prevent injury or fire, including proper unit installation and wire handling.
Cautions to prevent damage to the unit, such as grounding, avoiding moisture, and proper fuse replacement.
Instructions for turning the unit ON and OFF using the SRC button.
Guide to selecting different audio sources like Tuner, CD, or Auxiliary input.
How to select and adjust preset sound settings for different music types.
Choosing between Auto seek, Preset station seek, and Manual tuning modes.
How to select tuner source, band, and tune up or down the frequency.
Entering a specific frequency to tune directly to a radio station.
Inserting, playing, and pausing CD and MP3/WMA discs.
Selecting the HD Radio source and tuning stations.
Setting a security code to prevent theft when the unit is removed.
Explains basic operations of key buttons like VOL, SRC, ATT, and Faceplate Angle.
Step-by-step guide for installing the unit in a vehicle.
Visual guide showing how to connect various wires to the unit's terminals.
Steps to remove the rubber frame surrounding the unit.
How to safely remove the main unit from its mounting.
Solutions for problems like no power or inability to switch sources.
Troubleshooting poor sound quality, low volume, or lack of loudness effect.
How to improve poor radio reception or direct access tuning errors.
Resolving issues with external disc players, unplayable discs, and insertion problems.
Solutions for unplayable MP3/WMA files or skipping sound.
Troubleshooting no sound or low volume with HD Radio.
Technical details for the FM and AM tuner sections.
Technical details for the CD player section, including laser and digital filters.
Output power, tone action, preout levels, and auxiliary input details.