Kenwood KDC-MP625 User Manual

KDC-X679
KDC-MP6025
KDC-MP625
CD-RECEIVER
INSTRUCTION MANUAL
© B64-2764-00/00 (KW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you
obtain the best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer to the
model and serial numbers whenever you call upon your KENWOOD dealer for
information or service on the product.
Model KDC-X679/MP6025/MP625 Serial number
KDC-X679K2764U.Sr1.Indd1 03.11.13,8:36:29PM

Kenwood KDC-MP625 Specifications

FM Tuner Section

frequency range	87.9 MHz – 107.9 MHz
usable sensitivity	9.3dBf (0.8 µV /75 Ω)
quieting sensitivity	15.2dBf (1.6 µV /75 Ω)
frequency response	30 Hz – 15 kHz
signal to noise ratio	70 dB
selectivity	≥ 80 dB
stereo separation	40 dB

AM Tuner Section

frequency range	530 kHz – 1700 kHz
usable sensitivity	28 dBµ (25 µV)

CD Player Section

laser diode	GaAlAs
digital filter	8 Times Over Sampling
d/a converter	1 Bit
spindle speed	1000 – 400 rpm (CLV 2times)
frequency response	10 Hz – 20 kHz
total harmonic distortion (KDC-X679)	0.008 %
total harmonic distortion (KDC-MP6025/MP625)	0.01 %
signal to noise ratio (KDC-X679)	106 dB
signal to noise ratio (KDC-MP6025/MP625)	105 dB
dynamic range	93 dB
channel separation	96 dB

Audio Section

maximum output power	50 W x 4
full bandwidth power	22 W x 4
tone action bass	100 Hz ±10 dB
tone action middle	1 kHz ±10 dB
tone action treble	10 kHz ±10 dB
preout level/load (KDC-X679)	5000 mV/10 kΩ
preout level/load (KDC-MP6025/MP625)	2000 mV/10 kΩ
preout impedance (KDC-X679)	≤80 Ω
preout impedance (KDC-MP6025/MP625)	≤600 kΩ

General

operating voltage	14.4 V
current consumption	10 A
installation size	7-3/16 x 2-1/16 x 6-1/10 inch (182 x 53 x 155 mm)
weight	3.1 lbs (1.4 kg)