How to fix Kenwood KDW12ST3A that won't start?
If your Kenwood Dishwasher doesn't start, make sure the door is firmly closed. Check that the unit is properly connected to the mains by inserting the plug. Also, ensure the unit is switched on by pressing the “on” button and selecting a programme.
Why does my Kenwood Dishwasher have white residue on dishes?
If your Kenwood Dishwasher leaves a white residue on cutlery and crockery, and glassware appears cloudy with a film, it could be due to several reasons. You might not be using enough rinse aid, so replenish the reservoir and adjust the dispenser to a higher setting, or try a different brand. Ensure there's enough salt in the salt reservoir and that the cap is correctly screwed on. The detergent you're using may be unsuitable, so switch to a dishwasher-standard powder detergent. Finally, the salt consumption setting might be too low; select a higher setting.
What to do if my Kenwood KDW12ST3A Dishwasher leaves dishes wet?
If your Kenwood Dishwasher leaves dishes, cutlery, and glasses not dry, it might be due to insufficient rinse aid or an almost empty rinse aid reservoir. Try replenishing the reservoir, adjusting the rinse aid dispenser dial to a higher setting, or changing the brand of rinse aid. Also, leaving the crockery in the dishwasher until you hear the audible sound is recommended.
Why does my Kenwood KDW12ST3A Dishwasher leave streaks on glassware?
If you notice smearing on glassware and cutlery in your Kenwood Dishwasher, the rinse aid dosage might be set too high. Try adjusting the dial of the rinse aid dispenser to a lower setting.
How to remove tea stains from my Kenwood KDW12ST3A Dishwasher?
If tea or lipstick stains are not completely removed after a wash in your Kenwood Dishwasher, it could be due to a few reasons. The wash temperature of the selected programme might be too low, so select a programme with a higher wash temperature. Alternatively, the bleaching effect of the detergent you're using might be too low, so consider changing your detergent. Finally, pre-rinsing or removing the stains with a napkin prior to washing can also help.
Why is my Kenwood Dishwasher making a knocking noise?
If you hear a knocking noise in the wash cabinet of your Kenwood Dishwasher, it's likely that a spray arm is hitting against an item in a basket. Interrupt the programme and rearrange the items obstructing the spray arm.
Why is there detergent left in my Kenwood KDW12ST3A?
If your Kenwood Dishwasher leaves detergent residue in the dispenser at the end of the programme, the detergent dispenser was still damp when you added the detergent. Ensure that the dispenser is dry before adding detergent.
What to do if Kenwood Dishwasher detergent dispenser won't close?
If the detergent dispenser lid on your Kenwood Dishwasher cannot be closed properly, clogged detergent residue might be blocking the catch. Try cleaning the catch.
Why is my Kenwood KDW12ST3A making my glasses cloudy?
If your glassware is dull and discoloured after being washed in the Kenwood Dishwasher, and the film cannot be wiped off, it's likely that the glassware is not dishwasher proof and the surfaces are affected. It is recommended to wash the non-dishwasher proof glassware by hand.
Essential safety rules for operating the dishwasher, covering general usage and handling.
Instructions and warnings related to the appliance's electrical connection and earthing.
Guidelines for safe and correct operation, including what not to do.
Information on how to safely and responsibly dispose of the dishwasher at its end of life.
How to open/close the door and a list of items not suitable for washing.
Instructions on how to fill the detergent dispenser with powder or tablets.
Guidance on filling the rinse aid reservoir for optimal drying.
Procedures for adding salt and adjusting consumption based on water hardness.
Best practices for loading dishes and cutlery for effective cleaning.
How to load the upper basket and adjust its height for different items.
Specifics on loading for 12 place settings and use of the cup rack.
Guidance for loading the lower basket and the cutlery basket for optimal results.
Steps to begin a wash cycle, select programmes, and change them mid-wash.
Information about what happens at the end of a cycle and how to switch off the unit.
Recommended procedure for unloading dishes after a cycle.
How to set a delayed start time for a wash cycle.
Instructions for cleaning the dishwasher's exterior, door, seals, and control panel.
Steps for cleaning the interior components, including the filtering system.
How to clean the spray arms to ensure proper water circulation.
Guidance on preparing the dishwasher for frost, moving, or prolonged non-operation.
Explains error codes and their possible causes and remedies.
Troubleshooting common issues like the dishwasher not starting or poor washing results.
General| Type | Freestanding |
|---|---|
| Place Settings | 12 |
| Number of Programmes | 6 |
| Noise Level | 49 dB |
| Water Consumption per Cycle | 11 L |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Child Lock | Yes |
| Delay Start | Yes |
To Next Page
