Why will my Kenwood Dishwasher not start?
If your Kenwood Dishwasher isn't starting, make sure the door is properly closed. Also, check that the unit is connected to the mains by inserting the plug. Finally, ensure the unit is switched on by pressing the 'on' button and selecting a program.
What to do if Kenwood KDW8ST2A Dishwasher drain pump not working?
If the drain pump in your Kenwood Dishwasher is not working properly and you see fault code E4, the anti-flooding system has likely been activated. Disconnect the dishwasher from the mains and the water inlet, then call a qualified technician.
Why is there white residue on my Kenwood KDW8ST2A Dishwasher?
White residue on cutlery and crockery, clouding on glassware, and film that can be wiped off may occur if not enough rinse aid was used, so replenish the reservoir and adjust the rinse aid dispenser to a higher setting, or change the brand of rinse aid. This issue can also arise if there is not enough salt in the salt reservoir, so fill it. Ensure the salt reservoir cap is correctly screwed on. Also, check that you are using a suitable detergent, such as a dishwasher standard powder detergent. Finally, the salt consumption setting might be too low, so select a higher setting.
How to fix dishes not drying in Kenwood Dishwasher?
If your dishes, cutlery, and glasses aren't drying properly in your Kenwood Dishwasher, it could be due to insufficient rinse aid or an almost empty rinse aid reservoir. Try replenishing the reservoir, adjusting the rinse aid dispenser dial to a higher setting, or changing the brand of rinse aid. Also, leaving the crockery in the dishwasher until you hear the audible sound helps ensure they are dry.
What to do if Kenwood KDW8ST2A leaves tea stains?
If tea or lipstick stains are not completely removed from your dishes in the Kenwood Dishwasher, it could be because the wash temperature of the selected program was too low, so select a program with a higher wash temperature. The bleaching effect of the detergent used may also be too low, so try changing your detergent. Additionally, pre-rinsing or removing the stains with a napkin prior to washing can help.
How to stop smearing on glassware in Kenwood KDW8ST2A Dishwasher?
If smearing appears on glassware and cutlery in your Kenwood Dishwasher, it may be because the rinse aid dosage is set too high. Adjust the dial of the rinse aid dispenser to a lower setting.
How to fix E1 error on Kenwood KDW8ST2A?
If you're getting an E1 error on your Kenwood Dishwasher, it could be due to several reasons. First, ensure that the water tap is turned on and that the water pressure is not too low. If the flow meter is broken or the wire terminals which connect the flow meter are loose, disconnect the dishwasher from the mains and the water inlet, then call a qualified technician.
How to stop knocking noise in Kenwood Dishwasher?
If you hear a knocking noise in the wash cabinet of your Kenwood Dishwasher, it's likely that a spray arm is hitting against an item in the basket. To resolve this, interrupt the program and rearrange the items that are obstructing the spray arm.
What to do if Kenwood Dishwasher detergent dispenser won't close?
If the detergent dispenser lid on your Kenwood Dishwasher cannot be closed properly, it is probably because clogged detergent residue is blocking the catch. Clean the catch to resolve this issue.
Why is there detergent residue in my Kenwood KDW8ST2A Dishwasher dispenser?
If you find detergent residue left in the dispenser of your Kenwood Dishwasher at the end of the program, it may be because the detergent dispenser was still damp when you added the detergent. Make sure the dispenser is dry before adding detergent.
Essential safety precautions for appliance operation, including handling, electrical safety, and capacity limits.
Mandatory earthing requirements for the appliance and plug to ensure electrical safety.
Guidelines for safe operation, door handling, heating elements, loading items, and preventing tipping.
Instructions for making the appliance unusable before disposal and proper disposal methods.
Step-by-step guide for filling the detergent dispenser with powder or tablets.
Instructions on filling the rinse aid reservoir and adjusting its dispensing level for optimal drying.
Step-by-step instructions to initiate a wash programme, including door closing.
List of error codes, their causes, and recommended remedies for common appliance issues.
Troubleshooting for issues like the dishwasher not starting or the drain pump failing.
Solutions for common issues such as detergent residue, knocking noises, and smearing on dishes.
General| Type | Freestanding |
|---|---|
| Place Settings | 8 |
| Noise Level | 49 dB |
| Wash Programs | 6 |
| Height | 85 cm |
| Width | 60 cm |
| Depth | 60 cm |
| Quick Wash Time | 30 minutes |
| Colour | White |
| Manufacturer | Kenwood |
| Half Load | Yes |
| Delay Start | Up to 24 hours |
To Next Page
