To Next Page
M
Marc TapiaSep 15, 2025
Why is Alexa not responding on my Kenwood Receiver?
- TTonya MaldonadoSep 15, 2025
If there is no response from Alexa after the voice input, it means that the Amazon cloud was unable to analyze the voice input.
Why is Alexa not responding on my Kenwood Receiver?
If there is no response from Alexa after the voice input, it means that the Amazon cloud was unable to analyze the voice input.
What does 'Unsupported Device' mean on my Kenwood KMM-BT356 Receiver?
If the message “UNSUPPORTED DEVICE” appears on your Kenwood Receiver, verify that the connected USB device is compatible with the unit and that the file systems are in a supported format. You can also try reattaching the USB device.
What does 'No Device' mean on my Kenwood KMM-BT356?
If the message “NO DEVICE” appears on your Kenwood Receiver, connect a device (USB/iPod/iPhone) and change the source to USB or iPod USB again.
What does 'Disconnected' mean on my Kenwood KMM-BT356 Receiver?
If the message “DISCONNECTED” appears on your Kenwood Receiver, the USB is disconnected from the head unit. Please ensure that the device is properly connected through USB.
Why is Alexa giving the wrong response on my Kenwood KMM-BT356?
If you're getting the wrong response from Alexa, it's possible that Alexa misunderstood what was said or didn't catch the entire request or sentence spoken. Please try again.
What does 'Switching NG' mean on my Kenwood KMM-BT356?
If the message “SWITCHING NG” appears on your Kenwood Receiver, the connected phones might not support the phone switching feature.
What does 'USB Hub is not Supported' mean on Kenwood KMM-BT356 Receiver?
If the message “USB HUB IS NOT SUPPORTED” appears on your Kenwood Receiver, this unit cannot support a USB device connected via a USB hub.
What does 'Copy Pro' mean on my Kenwood KMM-BT356 Receiver?
If the message “COPY PRO” appears on your Kenwood Receiver, a copy-protected file is being played from the USB device.
What does 'Unresponsive Device' mean on my Kenwood Receiver?
If the message “UNRESPONSIVE DEVICE” appears on your Kenwood Receiver, ensure that the USB device is not malfunctioning and reattach it.
Why won't my Kenwood KMM-BT356 Receiver switch to USB source?
If the source doesn't change to “USB” when you connect a USB device while listening to another source, the USB port may be drawing more power than the design limit. Turn the power off and unplug the USB device. Then, turn the power back on and reattach the USB device. If the problem persists, turn the power off and on (or reset the unit) before trying a different USB device.
Crucial warnings and cautions for safe operation and handling of the device.
Guide for setting up the clock, date, and other essential device configurations.
How to communicate with Alexa, start listening, and perform basic operations.
Adjusting EQ, bass, treble, and tone settings for customized sound.
Setting speaker sizes, crossover frequencies, and phase for optimal audio output.
Configuring speaker delay times and vehicle-specific audio adjustments.
Essential safety warnings, cautions, and list of installation components.
Step-by-step guide for physically installing the unit and connecting its wiring.
Guidance for resolving problems with USB/iPod connectivity and Bluetooth functionality.
Solutions for issues with voice calling and Amazon Alexa services.
General| Category | Receiver |
|---|---|
| DIN Size | Single DIN |
| Bluetooth | Yes |
| Preamp Outputs | 2-channel |
| Equalizer | 13-band |
| Pandora Control | Yes |
| iHeartRadio Control | Yes |
| Spotify Control | Yes |
| Android Music Playback | Yes |
| iPhone/iPod Music Playback | Yes |
| FLAC Playback | Yes |
| Built-in Microphone | Yes |
| Steering Wheel Control Compatible | Yes |
| Faceplate Security | Removable |
| Max Power Output | 50W x 4 |
| AUX Input | Front |
| Display | LCD |
| Radio Tuner | AM/FM |
| Dimensions | 178mm x 50mm x 159mm |
