To Next PageTo Next PageWhat to do if my Kenwood KMM-BT322U Receiver says 'NO DEVICE' or 'READING' keeps flashing?
If you see “NO DEVICE” or “READING” flashing, try these steps: first, switch off the developer options on your Android device. If that doesn't work, try reconnecting the Android device.
What does 'NA FILE' mean on my Kenwood Receiver?
If you see the message “NA FILE”, it means you should make sure the media you're using contains supported audio files.
Why is there no sound coming from my Kenwood KMM-BT322U?
If you can't hear any sound, first adjust the volume to the desired level. If that doesn't work, check the cords and connections to ensure they are properly connected.
What to do if my Kenwood KMM-BT322U Receiver says 'MISWIRING CHECK WIRING Turn the power off, then check to be sure the THEN PWR ON'?
If the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the THEN PWR ON” appears, turn off the power. Check to ensure the terminals of the speaker wires are properly insulated, then turn the power back on.
How to fix Bluetooth pairing issues on my Kenwood KMM-BT322U Receiver?
If you're having trouble pairing a Bluetooth device, ensure that you've entered the same PIN code on both the Kenwood unit and the Bluetooth device. If the problem persists, delete the pairing information from both devices and try pairing them again.
Why is no Bluetooth device detected by my Kenwood KMM-BT322U Receiver?
If your Kenwood Receiver isn't detecting a Bluetooth device, try searching for the device again from the Bluetooth device itself. If that doesn't work, try resetting the unit.
What does 'CH LOCKED LOCK CODE?' mean on my Kenwood Receiver?
If your Kenwood Receiver displays “CH LOCKED LOCK CODE?”, you need to enter the correct pass code to unlock it.
What does 'ADD ERROR' mean on my Kenwood KMM-BT322U?
The message “ADD ERROR” indicates that creating a new station was unsuccessful.
What does 'THUMBS N/A' mean on my Kenwood KMM-BT322U Receiver?
The message “THUMBS N/A” means that registration of thumbs up/thumbs down is not allowed.
What does 'NO STATIONS' mean on my Kenwood KMM-BT322U Receiver?
The message “NO STATIONS” indicates that no stations were found.
General| Type | Digital Media Receiver |
|---|---|
| Faceplate Security | Detachable |
| Peak Power Output | 50 W x 4 |
| RMS Power Output | 22 W x 4 |
| Preamp RCA Outputs | 2 Pairs |
| Subwoofer Preamp RCA Output | Yes |
| Built-in Equalizer | Yes |
| EQ Bands | 13-band |
| Display Type | LCD |
| Display Color | Variable |
| Button Color | Variable |
| CD Playback | No |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| FLAC Playback | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| Bluetooth | Yes |
| HD Radio | No |
| Satellite Radio Ready | No |
| Steering Wheel Control Compatible | Yes |
| Tuner | AM/FM |
| DIN Size | 1 DIN |
| Compatibility | Android |
| Dimensions (W x H x D) | 178mm x 50mm x 153mm |
| Preamp Voltage | 2.5 V |
Playing audio from USB, iPod, and Android devices via connection.
Initial setup, subscription activation, and tuning SiriusXM channels.
Connecting and pairing Bluetooth devices for the first time.
Handling incoming calls, call duration, and call management.
Dialing numbers, using the phonebook, and voice recognition.
Streaming audio from connected Bluetooth devices.
Resolving sound issues, wiring errors, and protection mode.
Troubleshooting device connection and playback errors.
Resolving issues with music apps and Bluetooth connectivity.
Guide to connecting the unit's wiring harness and power.
Steps for installing the unit in the dashboard and removing it.
