What does it mean when my Kenwood KMR-D362BT Car Receiver displays “CANNOT SAVE”?
- MMichael DownsSep 9, 2025
If your Kenwood Car Receiver displays “CANNOT SAVE”, it indicates that adding to the favorite category has failed.
What does it mean when my Kenwood KMR-D362BT Car Receiver displays “CANNOT SAVE”?
If your Kenwood Car Receiver displays “CANNOT SAVE”, it indicates that adding to the favorite category has failed.
Why is the radio reception so poor on my Kenwood KMR-D362BT Car Receiver?
If you're experiencing poor radio reception on your Kenwood Car Receiver, ensure the antenna is firmly connected. Also, try pulling the antenna out completely to improve the signal.
What to do if my Kenwood KMR-D362BT Car Receiver isn't detecting Bluetooth devices?
If your Kenwood Car Receiver isn't detecting any Bluetooth devices, try searching for devices from the Bluetooth device again. If that doesn't work, reset the unit.
Why can't I pair my device with my Kenwood Car Receiver via Bluetooth?
If you're having trouble pairing your device with your Kenwood Car Receiver via Bluetooth, make sure you've entered the same PIN code on both devices. If the problem persists, delete the pairing information from both the unit and your Bluetooth device, and then try pairing them again.
What should I do if my Kenwood KMR-D362BT shows “DISCONNECTED”?
If your Kenwood Car Receiver displays “DISCONNECTED”, check the connection to the device.
What does “NO CONTENT” mean on my Kenwood KMR-D362BT during TuneScan?
If your Kenwood Car Receiver displays “NO CONTENT”, it means there is insufficient content to start TuneScan.
What does “TOC ERROR” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver shows “TOC ERROR”, make sure the disc is clean and inserted properly.
What to do when Kenwood KMR-D362BT Car Receiver shows “PLEASE EJECT”?
If your Kenwood Car Receiver displays “PLEASE EJECT”, reset the unit. If this does not solve the problem, consult your nearest service center.
What does “NA FILE” mean on my Kenwood KMR-D362BT Car Receiver?
If your Kenwood Car Receiver shows “NA FILE”, ensure that the disc contains supported audio files.
What does “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals THEN PWR ON” mean on my Kenwood Car Receiver?
If you see the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals THEN PWR ON” on your Kenwood Car Receiver, turn the power off. Then, check to ensure the terminals of the speaker wires are properly insulated before turning the power back on.
Bluetooth | Yes |
---|---|
USB Port | Yes |
Tuner | AM/FM |
Display Type | LCD |
AUX Input | Yes |
Subwoofer Control | Yes |
Detachable Faceplate | Yes |
Pandora Control | Yes |
Spotify Control | Yes |
SiriusXM Ready | No |
HD Radio | No |
FLAC Playback | Yes |
Radio Tuner | Yes |
Built-in Microphone | Yes |
Max Power Output | 50 Watts x 4 |
RMS Power Output | 22 Watts x 4 |
Compatible Formats | MP3, WMA, FLAC |
Preset Stations | 18 |
Warning about potential hazardous radiation exposure from controls or adjustments.
Details FCC compliance, potential interference, and correction measures.
States compliance with Industry Canada licence-exempt RSS standards and operating conditions.
Describes compliance with FCC/IC radiation exposure limits and RF energy levels.
Explains how operations are explained and how to interpret references in the manual.
Provides instructions for cleaning the unit and handling discs.
Identifies and describes the main controls and indicators on the unit's faceplate.
Describes the remote control, its sensor, and battery replacement.
Instructions to cancel the demonstration mode and enter normal operation.
Guides on setting the unit's clock and configuring initial system settings.
Configuration options for Key Beep, Source Select, CD Read, and Firmware Update.
Instructions on how to search for radio stations using different methods.
Details settings like Auto Memory, Mono Set, Regional, AF Set, and TI.
Explains how to search for stations based on program type (Speech/Music).
Steps to play audio files from CD, USB, iPod, and Android devices.
Explains playback control modes and selecting music drives.
Methods for navigating files and performing quick searches.
Instructions for direct music search and listening to streaming services.
Steps to prepare and start listening to Pandora via Bluetooth.
How to create, save, search, and bookmark Pandora stations.
Steps to prepare and start listening to iHeartRadio via Bluetooth.
Guides on searching, skipping cities, and deleting iHeartRadio stations.
Steps to connect the tuner, activate, and start listening to SiriusXM.
Explains Keymode settings and how to select channels.
Features for storing favorite channels and replaying content.
How to preview songs and configure SiriusXM settings like channel lock.
Lists supported Bluetooth profiles and audio codecs.
Step-by-step guide to pairing a Bluetooth device with the unit.
Instructions for answering, rejecting, and ending calls, plus voice quality adjustments.
How to switch between hands-free and private talk modes during calls.
Configuration options for auto-answer and battery/signal display.
Methods for making calls via call history, phonebook, or voice dialing.
How to dial numbers directly and use voice recognition for calls.
Procedures for deleting contacts and storing them in memory.
Options for selecting devices, audio modes, and editing PIN codes.
Guide to checking Bluetooth connectivity and profile compatibility.
Controls for playback, skipping tracks, and repeat/random modes via Bluetooth.
Instructions for streaming Pandora and iHeartRadio over Bluetooth.
Steps to connect and listen to a portable audio player via AUX.
Configuration options for sound levels, EQ, and presets.
Detailed settings for equalizer, bass, mid, and treble frequency/Q factors.
Options for subwoofer output, phase, HPF, and speaker balance.
Customizing color, dimmer, brightness, and text scrolling.
Details on supported file types, discs, and USB device requirements.
Information on iPod/iPhone, Android, Pandora, iHeartRadio, and Bluetooth compatibility.
Common issues and solutions for general operation, radio reception, and disc playback.
Solutions for issues related to Android devices and Pandora app.
Technical specifications for the tuner and CD player components.
Solutions for common problems with iHeartRadio, SiriusXM, and Bluetooth.
Solutions for poor sound quality, voice calling issues, and device control problems.
Continuation of technical specifications for tuner and CD player.
Technical details for USB, Bluetooth, and Auxiliary input.
Specifications for audio output, power, and general operating parameters.
Instructions for fitting the unit into the dashboard, including trim plate and mounting sleeve.
Steps on how to safely detach the unit from the dashboard.
Detailed diagram for connecting speakers, power, ignition, and ground wires.
Information on connecting steering wheel remote and navigation system.
Wiring diagram for KMR-D362BT, including microphone and remote connections.
Lists the physical components included for unit installation.