To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KR-V6090 and is the answer not in the manual?
General| Number of Channels | 5.1 |
|---|---|
| Input Sensitivity (MM) | 2.5 mV |
| Input Sensitivity (line) | 150 mV |
| Speaker load impedance | 4 - 16 ohms |
| Power Output | 100 W per channel (8 ohms) |
| Tuning range | FM: 87.5 - 108 MHz, AM: 530 - 1710 kHz |
| Frequency Response | 20 Hz - 20 kHz |
| Video Connections | composite |
| Dimensions | 440 x 150 x 380 mm (W x H x D) |
| Weight | 10.5 kg |
Essential safety and power-on instructions for unit operation.
Critical warnings to prevent fire and electric shock hazards.
Guidance on unpacking the unit and identifying included accessories.
Explains surround sound modes for enhanced audio experience.
Describes the 3D sound space simulation for improved depth and imaging.
Details the system for transmitting digital data with FM broadcasts.
Illustrates how to connect various audio and video devices.
Procedure to reset the microcomputer in case of operational errors.
Guidelines for proper unit placement to ensure ventilation.
How to connect KENWOOD components for system control.
Explains remote control and automatic operation via system links.
Instructions for switching between XS8 and SL16 system control modes.
Diagrams and instructions for connecting front, center, and surround speakers.
Information on the subwoofer pre-out terminal availability.
Guide for connecting the AM loop antenna for indoor use.
Instructions for connecting indoor or outdoor FM antennas.
Operation of power switches, input selector, and volume control.
Controls for surround modes, speaker output, and tone adjustments.
Buttons for tuning, band selection, RDS display, and memory functions.
Explains the functions of keys on the remote control unit.
Guide for correctly inserting batteries into the remote control.
Steps for operating connected components with the remote.
Table showing key correspondence for different component types.
Steps for preparing playback and selecting speaker output.
How to select the input source and adjust playback volume.
How to adjust the bass, middle, and treble frequencies.
Procedure for adjusting the balance between left and right speakers.
Enables pure signal path for superior sound quality.
Compensates for low frequencies during low-volume listening.
How to enable headphone listening by disabling speakers.
Procedure to temporarily mute the audio output.
Steps for synchro recording and recording music sources.
Instructions for copying tapes between TAPE 1 and TAPE 2.
How to monitor source or recorded sound using TAPE 2 MONITOR.
Basic steps for tuning into radio stations.
How to choose FM/AM bands and auto/manual tuning.
Setting the TUNER input and selecting the broadcast band.
Step-by-step guide to tuning by entering the exact frequency.
Details on PTY, EON, PS, RT, and Auto Memory functions.
How the DISPLAY key cycles through RDS information.
Procedure to automatically store RDS stations into memory.
How to recall stations stored via RDS Auto Memory.
Steps for manually storing AM/FM stations into memory.
How to recall a specific station stored in memory.
How to cycle through preset stations using P. CALL.
Guide to start searching for stations by program genre.
Using keys or numeric input to choose a program type.
Performing the search for the selected program type.
How to change the program type during or after a search.
Procedure to reserve program alerts like traffic or news.
Adjusting volume for when EON reception overrides current audio.
Choosing specific program types (TA, NEWS, INFO) for alerts.
Meaning of the TP indicator for traffic broadcasts.
How to find and wait for EON-reserved stations.
Steps to turn off active EON reservations.
Instructions for playing videotapes.
How to record video from one component to another.
Explanation of the DOLBY PRO LOGIC surround mode.
Explanation of the DOLBY 3 STEREO surround mode.
Guidelines for optimal surround speaker installation.
Adjusting settings for DOLBY PRO LOGIC and DOLBY 3 STEREO.
Choosing the correct center mode (Normal, Wideband, Phantom).
Procedure to balance the sound level of left and right front speakers.
Method to calculate optimal speaker delay based on room dimensions.
Setting individual speaker volume levels using test tones.
Adjusting the calculated delay time for each speaker.
How to select STEREO, PRO LOGIC, or 3 STEREO modes.
Playing video software and adjusting volume during surround playback.
Procedure to deactivate surround modes.
How to adjust the sound tone and effect strength for SRS 3D.
Modifying the depth (CENTER) or width (SPACE) of the SRS 3D effect.
Steps to reset the unit's microcomputer for operational issues.
Common amplifier problems and their solutions.
Common tuner problems and their solutions.
Solutions for problems with remote control functionality.
Information on what settings are lost when power is disconnected.
Detailed audio performance metrics like power output and distortion.
Performance metrics for the FM tuner section.
Specs for AM tuner, video I/O, power, dimensions, and weight.
Detailed audio performance metrics like power output and distortion.
Performance metrics for the FM tuner section.
Specs for AM tuner, video I/O, power, dimensions, and weight.
