Need help?Do you have a question about the Kenwood KR-V7040 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Power Output | 100 watts per channel (8 ohms) |
| Tuning range | FM: 87.5 - 108 MHz, AM: 530 - 1700 kHz |
| Input Sensitivity | 150 mV (Line) |
| Signal-to-Noise Ratio | 100 dB |
| Speaker load impedance | 6 - 16 ohms |
| Video Connections | Composite |
| Frequency Response | 10Hz-100kHz (±1dB) |
Protect from moisture, avoid electric shock.
Careful movement, smell detection, and servicing.
Adjusting for speaker impedance to prevent damage.
Identifying key controls and display indicators.
Managing speakers, tone, and balance.
Using the remote for receiver and component control.
Initial setup and choosing audio/video input.
Controlling volume, balance, and tone settings.
Temporarily silencing audio, listening privately.
Finding and saving favorite radio stations.
Fine-tuning center channel for enhanced dialogue clarity.
Setting center mode, test tones, and delay.
Adjusting levels for immersive movie audio.
Resolving issues with no sound or unbalanced audio.
Addressing poor reception and external noise.
To Next Page
