Kenwood KR-V8060 User Manual

AUDIO VIDEO STEREO RECEIVER
KR-V8060
INSTRUCTION MANUAL
KENWOOD CORPORATION
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty
card, and in the space provided below. Refer to the mode! and serial numbers whenever you cail
upon your dealer for information or service on this product.
Model Serial Number
Unpacking
Unpack the unit carefully and make sure that ali accessories are put aside so they will not be lost.
Examine
the
unit
for
any
possibility
of
shipping
damage.
If
your
unit
is
damaged
or
fails
to
operate,
notify your dealer immediately. If your unit was shipped to you directly, notify the shipping com-
pany without delay. Only the consignee (the person or company receiving the unit} can file a claim
against the carrer for shipping damage.
We recommend that you retain the original carton and packing materials for use should you trans-
port or ship the unit in the future.
Accessories
FM indoor antenna .......(1} AM loop antenna........... Loop antena stand ........ (1)
Remote control unit...... {1} Batteries (RB6/AA) ..........
ij
Except for U.S.A., Mexico,
Canada and Australia
B60-1437-10 CSD (K,P.M,X,Y,R) {MG:

Kenwood KR-V8060 Specifications

General

Channels	5.1
Tuning range	FM, MW
Speaker load impedance	4 - 16 ohms
Type	AV Receiver
Input Sensitivity	2.5mV (MM), 200mV (line)
Signal-to-Noise Ratio	100dB (line)
Video Connections	composite

Summary

System Connection

Speaker Connection

Antenna Connection Guide

Antenna Terminal Connection Method

Illustrates the method for connecting cables to antenna terminals.

AM Antenna Connection

Details for connecting indoor or outdoor AM antennas for optimal reception.

FM Antenna Connection

Instructions for connecting indoor or outdoor FM antennas for stable signal reception.

FM DE-EMPHASIS / CHANNEL SPACE Switch

Controls and Indicators Overview

Remote Control Unit

Playing Music

Sound Adjustment Functions

Listening Through Headphones

Recording Music

Tape Dubbing TAPE 2 to TAPE 1

Procedure for dubbing audio from Tape 2 to Tape 1.

Tape Dubbing TAPE 1 to TAPE 2

Procedure for dubbing audio from Tape 1 to Tape 2.

Synchro Recording

Synchronized recording from CD or turntable to cassette deck.

Broadcast Reception

Receiving Broadcast Stations

Steps to tune in and receive broadcast radio stations using the tuner.

Tuning Radio by Frequency

Instructions for tuning radio stations by manually entering the frequency.

Preset Station Management

Storing Stations in Memory

How to save desired radio stations into the unit's memory presets.

Receiving a Preset Station

Procedure to recall and listen to a previously stored radio station.

Receiving All Preset Stations in Order

Method to sequentially play back all stored radio stations in order.

Video Component Operation

Videotape Playback

Steps to play back video sources connected to the unit.

Video Source Recording

Instructions for recording video signals from external components.

Presence Play Modes

DOLBY PRO LOGIC Surround Mode

Reproduces movie theater sound field using Dolby Surround data.

DOLBY 3 STEREO Mode

Improves center image positioning for stereo sources with a center speaker.

DSP Presence Mode

Adds live atmosphere to music with reverberation effects (Arena, Jazz Club, Stadium).

DSP LOGIC Mode

Provides movie theater atmosphere by adding reverberation to Dolby Pro Logic.

DOLBY PRO LOGIC Surround Arrangement

DOLBY PRO LOGIC Surround Playback

Steps to activate and play back Dolby Pro Logic surround sound.

DOLBY 3 STEREO Adjustment and Playback

Enjoying Music with Presence

Select Presence Mode

Choose between surround modes like DSP, Dolby Pro Logic, or 3 Stereo.

Select Sound Field (DSP Presence Mode)

Choose a sound field (Arena, Jazz Club, Stadium) for DSP presence mode.

Adjust Effect Level

Control the intensity of the reverberation effect for DSP modes.

Adjusting Sound Balance and Delay

Adjust Volume Balance

Balance the volume between center and rear speakers in DSP Logic mode.

Adjust Rear Speaker Volume

Adjust the volume level for the rear speakers.

Adjust Delay Time

Set the audio delay time for surround sound effects.

Troubleshooting Guide

Remote Control Unit Issues

Common problems and solutions for the remote control unit.

Amplifier Issues

Troubleshooting sound output problems and hum noise.

Tuner Issues

Solutions for reception problems and interference.

Specifications

Audio Section Specifications

Technical details for audio output power, distortion, and frequency response.

FM Tuner Section Specifications

Technical details for FM tuner sensitivity, selectivity, and separation.

AM Tuner Section Specifications

Technical details for AM tuner sensitivity, selectivity, and distortion.

General Specifications

Details on power consumption, AC outlets, dimensions, and weight.