Kenwood KR-V8070 User Manual

Lists included accessories with item count.

How to set the AC voltage selector switch for safe operation.

Information regarding radio frequency energy and potential interference.

Explains surround sound modes for realistic audio effects.

Adds presence sound components for movie theater and live atmosphere.

Allows a single remote to control multiple components.

Diagrams and instructions for connecting audio sources like turntables and tape decks.

How system control allows automatic input switching between components.

Illustrates AC outlet types for different regions.

Important notes regarding connections, cooling fan, and cord handling.

Usage of PRE OUT jacks for connecting amplifiers or subwoofers.

Instructions for connecting speaker cables using banana plugs.

How to set the impedance selector based on speaker impedance.

How to connect the AM loop antenna for indoor use.

Extending AM reception with an outdoor wire.

Using the accessory antenna for temporary indoor reception.

Connecting an FM outdoor antenna for stable reception.

Adjusting the FM reception setting for different regions.

Explains the main display panel and its indicators.

Details of buttons, knobs, and jacks on the front panel.

Explanation of the standby mode and its function.

Keys to select which component the remote controls.

Explains various function keys on the remote control.

Step-by-step guide to inserting batteries into the remote.

How to use the remote control to operate the system and components.

How to set the remote to control the receiver unit.

Function of numeric keys when the tuner input is selected.

How to select CD or tape deck operation modes.

Function of numeric keys when CD input is selected.

Locating the correct code for the component to be controlled.

Selecting the component type (VCR, LD, TV/CABLE) on the remote.

Entering the numeric code using the remote's keypad.

Selecting the component type on the remote display.

Using the remote control keys after setting up the component.

How to power on the system.

Choosing speaker output (A, B, or OFF).

Choosing audio sources like TUNER, TAPE, PHONO.

Playing the selected audio input.

Using the volume control knob and keys.

Using BASS and TREBLE controls to adjust frequencies.

Using the BALANCE control for stereo imaging.

Engaging the Natural Bass Circuit for richer bass.

Using the MUTE key to silence audio output.

Disabling speaker output for headphone listening.

Connecting headphones to the PHONES jack.

Setting the listening volume for headphones.

Selecting the audio source for Line Straight playback.

Activating the Line Straight mode for higher sound quality.

Steps to record audio from a selected source to a tape deck.

Instructions for dubbing tapes from TAPE 2 to TAPE 1.

Instructions for dubbing tapes from TAPE 1 to TAPE 2.

Information on using the TAPE 2 (MONITOR) terminals.

Steps for tuning into radio stations using auto or manual methods.

Switching between FM and AM bands.

Choosing between auto and manual tuning.

Manually entering a radio station's frequency using numeric keys.

Activating memory storage mode.

Assigning a station to a preset memory slot.

Ensuring the tuner input is selected.

Recalling a stored station using its preset number.

Cycling through preset stations sequentially.

Steps to play back video from a connected deck.

Steps to record video from a source to a video deck.

Function of the VISUAL FIX key for switching inputs.

Provides a live atmosphere with three sound fields.

Creates a movie theater atmosphere with reverberation.

Reproduces movie theater sound fields for video software.

Improves center acoustic image positioning.

Selecting DSP or DSP LOGIC modes.

Selecting specific sound fields like Arena, Jazz Club, Stadium, Large, Small.

Adjusting the delay time for DSP effects.

Fine-tuning center and rear speaker levels.

How to turn off presence playback modes.

Activating the DOLBY PRO LOGIC mode.

Selecting center mode (Normal, Wideband, Phantom).

Adjusting the delay time for surround effects.

Adjusting volume levels for center and rear speakers.

Activating the DOLBY PRO LOGIC mode.

Playing video sources.

Adjusting the playback volume.

How to turn off the DOLBY PRO LOGIC mode.

Activating the DOLBY 3 STEREO mode.

Selecting center mode for DOLBY 3 STEREO.

Adjusting volume for the center speaker.

Playing video sources.

Adjusting playback volume.

How to turn off DOLBY 3 STEREO mode.

Procedure to reset the microcomputer in case of malfunction.

Troubleshooting common amplifier issues like no sound or distorted sound.

Troubleshooting common tuner issues like no reception or interference.

Troubleshooting steps when the remote control does not work.

Table showing which remote key controls which function for different components.

Manufacturer codes for programming VCRs.

Manufacturer codes for programming LD players.

Lists of manufacturers and their corresponding setup codes for TVs.

Lists of manufacturers and their corresponding setup codes for Cable TV.

Technical specifications for the audio output and performance.

Technical specifications for the FM tuner.

Technical specifications for the AM tuner.

Overall specifications like power consumption and dimensions.

Specifications tailored for regions outside the US, Mexico, and Canada.

Technical specifications for the audio output and performance.

Technical specifications for the FM tuner.

Technical specifications for the AM tuner.