Need help?Do you have a question about the Kenwood KRC-177RA and is the answer not in the manual?
FM Tuner Section| frequency range (50 kHz space) | 87.5 MHz – 108.0 MHz |
|---|---|
| usable sensitivity (S/N = 26dB) | 0.7 µV/75 Ω |
| quieting sensitivity (S/N = 46dB) | 1.6 µV/75 Ω |
| frequency response (±3.0 dB) | 30 Hz – 15 kHz |
| signal to noise ratio (MONO) | 65 dB |
| selectivity (DIN) (±400 kHz) | ≥ 80 dB |
MW Tuner Section| frequency range (9 kHz space) | 531 kHz – 1611 kHz |
|---|---|
| usable sensitivity (S/N = 20dB) | 25 µV |
LW Tuner Section| frequency range | 153 kHz – 281 kHz |
|---|---|
| usable sensitivity (S/N = 20dB) | 45 µV |
Cassette Player Section| tape speed | 4.76 cm/sec. |
|---|---|
| wow & flutter (WRMS) | 0.12 % |
| frequency response (120 µs) | 30 Hz – 14 kHz (±3 0dB) |
| separation (1 kHz) | 43 dB |
| signal to noise ratio | 54 dB |
Audio Section| maximum output power | 35 W × 4 |
|---|---|
| output power (DIN 45324, +B=14.4 V) | 21 W × 4 |
| bass tone action | 100 Hz ±10 dB |
| treble tone action | 10 kHz ±10 dB |
| preout level / load | 1800 mV / 10 kΩ |
| preout impedance | ≤ 600 Ω |
General| operating voltage | 14.4 V (11 – 16 V allowable) |
|---|---|
| current consumption | 10 A at Rated power |
| installation size (W × H × D) | 182 × 53 × 155 mm |
| weight | 1300 g |
Precautions to prevent injury and fire hazards during unit operation and installation.
Precautions to prevent damage to the unit from environmental factors and improper handling.
Explanation of fundamental buttons like SRC, ATT, LOUD, and their functions.
Explains Radio Data System features and associated indicators on the display.
Instructions for turning the unit on, off, and entering standby mode.
Guide to entering and using the menu system to adjust various functions.
How to choose between automatic seek and manual tuning modes.
Overview of the RDS digital information system for radio broadcasts.
Adjusting sound parameters like Bass, Treble, Balance, Fader, and Volume.
Step-by-step guide for physically installing the unit in a vehicle.
Details on wiring the external power connector (A-4, A-5, A-7, A-8).
Proper connection procedures for the vehicle's ISO connectors.
Solutions for problems like no power, no sound, or low volume.
Troubleshooting for button malfunctions, distorted sound, and poor radio reception.
Solutions for memory erasure, TEL mute not working, or accidental muting.
To Next Page
