Do you have a question about the Kenwood KRC-259R and is the answer not in the manual?
maximum output power | 35 W × 4 |
---|---|
output power (DIN 45324, +B=14.4 V) | 25 W × 4 |
preout level / load | 1800 mV / 10 kΩ |
operating voltage | 14.4 V (11 – 16 V allowable) |
---|---|
current consumption | 10 A at Rated power |
preout impedance | ≤ 600 Ω |
installation size (W × H × D) | 182 × 53 × 154 mm |
---|---|
weight | 1400 g |
maximum output power | 30 W × 4 |
---|---|
output power (DIN 45324, +B=14.4 V) | 20 W × 4 |
operating voltage | 14.4 V (11 – 16 V allowable) |
---|---|
current consumption | 10 A at Rated power |
installation size (W × H × D) | 182 × 53 × 154 mm |
---|---|
weight | 1400 g |
frequency range (50 kHz Space) | 87.5 MHz – 108.0 MHz |
---|---|
usable sensitivity (S/N = 26dB) | 0.7 µV/75 Ω |
quieting sensitivity (S/N = 46dB) | 1.6 µV/75 Ω |
frequency range (9 kHz Space) | 531 kHz – 1611 kHz |
---|---|
usable sensitivity (S/N = 20dB) | 25 µV |
frequency range | 153 kHz – 281 kHz |
---|---|
usable sensitivity (S/N = 20dB) | 45 µV |
tape speed | 4.76 cm/sec. |
---|---|
wow & flutter (WRMS) | 0.12 % |
frequency response (120 µs) | 30 Hz – 14 kHz (±3 dB) |