Need help?Do you have a question about the Kenwood KRC-266 and is the answer not in the manual?
FM Tuner| FM frequency range (50 kHz space) | 87.5 MHz – 108.0 MHz |
|---|---|
| FM frequency range (200 kHz space) | 87.9 MHz – 107.9 MHz |
| FM usable sensitivity (S/N = 30dB) | 9.3 dBf (0.8 µV/75 Ω) |
| FM quieting sensitivity (S/N = 50dB) | 15.2 dBf (1.6 µV/75 Ω) |
| FM frequency response (±3.0 dB) | 30 Hz – 15 kHz |
| FM signal to noise ratio (MONO) | 70 dB |
| FM selectivity (±400 kHz) | ≥ 80 dB |
| FM stereo separation (1 kHz) | 40 dB |
AM Tuner| AM frequency range (9 kHz space) | 531 kHz – 1611 kHz |
|---|---|
| AM frequency range (10 kHz space) | 530 kHz – 1700 kHz |
| AM usable sensitivity (S/N = 20dB) | 28 dBµ (25 µV) |
Cassette Player| Tape speed | 4.76 cm/sec |
|---|---|
| Wow & Flutter (WRMS) | 0.12 % |
| Cassette frequency response (±3.0 dB) (120 µs) | 30 Hz – 14 kHz |
| Cassette separation (1 kHz) | 40 dB |
| Cassette signal to noise ratio | 52 dB |
Audio| Maximum output power | 45 W x 4 |
|---|---|
| Full bandwidth power (at less than 1% THD) | 22 W x 4 |
| Bass tone action | 100 Hz ±10 dB |
| Treble tone action | 10 kHz ±10 dB |
| Preout level / Load | 1800 mV / 10 kΩ |
| Preout impedance | ≤ 600 Ω |
General| Operating voltage | 14.4 V |
|---|---|
| Current consumption | 10 A |
| Installation size (W x H x D) | 182 x 53 x 158 mm |
| Weight | 1.3 kg |
Precautions to prevent injury or fire, including wire gauge and handling metallic objects.
Precautions to prevent machine damage, including grounding and avoiding extreme conditions.
Instructions for turning the unit ON/OFF and selecting audio sources.
How to choose between Auto seek and Manual tuning modes.
Steps for selecting tuner source, band, and tuning stations.
How to store and recall stations using preset memory buttons.
Instructions for inserting, playing, and ejecting cassette tapes.
Instructions for selecting and playing discs from an external CD player/changer.
Warnings and cautions regarding wire connections and fuse handling.
Diagram showing connections for power, speakers, antenna, and optional components.
Solutions for power not turning ON and buttons not responding.
Troubleshooting source switching, no sound, or poor sound quality.
Solutions for faceplate operation problems and memory erasure.
Addressing poor radio reception and antenna connection issues.
Troubleshooting issues with disc source display, playback, and track selection.
Explanations for system error codes and their corresponding solutions.
Explanations for messages like E-0d (overheating) and LOAd.
To Next Page
