Do you have a question about the Kenwood KS-205HT and is the answer not in the manual?
Brand | Kenwood |
---|---|
Model | KS-205HT |
Category | Speaker System |
Language | English |
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card.
Dispose of polyethylene bags out of reach of children to prevent suffocation hazard.
Do not use the appliance near water, such as bathtubs or swimming pools.
Do not install the unit near heat sources or direct sunlight.
Do not attempt to open or modify the unit to avoid fire hazard or malfunction.
Use a clean dry cloth for cleaning; do not use volatile solvents.
If abnormal smell or smoke is detected, turn off power and unplug the appliance.
Position speakers for full surround sound effect by placing them around the TV.
Front and center speakers are magnetically shielded; check for color distortion near TV.
Place speakers on a floor or stable horizontal surface, being careful not to knock them over.
Speakers can be mounted vertically or horizontally using mount holes and screws.
Connect speaker wires to matching colored terminals, ensuring amplifier is off before connecting.
Diagram shows connection of the optional subwoofer (SW-05HT) with this speaker system.
Do not exceed maximum input power and ensure amplifier compatibility with 8-ohm speakers.
Detailed specifications for front, center, and rear speakers, including dimensions and weight.
KENWOOD policy of continuous advancements means specifications may change without notice.