EasyManuals Logo

Kenwood KVT-514DVD User Manual

Kenwood KVT-514DVD
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Before
Use
AWARNING
To
prevent injury or fire, take
the
following
precautions:
o
To
prevent a short circuit, never
put
or leave any
metallic objects (such
as
coins or metal tools) inside
the unit.
o Do not watch or fix your
eyes
on the unit's display
when you
are
driving for any extended period.
How
to
reset your unit
o If the unit or the connected unit
fails
to
operate
properly,
press
the
Reset
button. The unit returns
to
factory settings when the
Reset
button
is
pressed.
o Remove the
USB
device before pressing
the
Reset
button.
Pressing
the
Reset
button
with
the
USB
device installed can damage the data contained in
the
USB
device.
For
how
to
remove the
USB
device,
see
<Playing a
USB
device> (page
12).
nlJ
I
KENWOOD)
~
[~(I
~~~~~~~
I~EJE::J
Reset
button
Cleaning
the
Unit
If the faceplate
of
this unit
is
stained, wipe it with a
dry
soft cloth such
as
a silicon cloth.
If the faceplate
is
stained badly, wipe the stain
off
with
a cloth moistened
with
neutral cleaner, then
wipe it again
with
a clean soft dry cloth.
Lh
o Applying spray cleaner directly
to
the
unit
may affect its
mechanical parts. Wiping
the
faceplate
with
a hard cloth
or using a volatile liquid such
as
thinner
or
alcohol may
scratch
the
surface or
erases
characters.
Lens Fogging
When you turn on the
car
heater in cold weather,
dew
or condensation may form on the lens in the
disc player
of
the unit. Called lens fogging, this
condensation on the lens may
not
allow discs to
play.
In
such a situation, remove the disc and wait for the
condensation
to
evaporate. Ifthe unit still does not
operate normally after a while, consult your Kenwood
dealer.
Handling discs
o Do not touch the recording surface
of
the disc.
o Do not stick tape etc. on the disc, or
use
a disc
with
tape stuck on it.
o Do
not
use
disc type accessories.
6 KVT-514/KVT-534DVD
o Clean from the center
of
the disc and move
outward.
o When removing discs from this unit, pull them
out
horizontally.
o If the disc center hole or outside rim
has
burrs,
use
the disc only after removing the burrs
with
a
ballpoint pen etc.
Discs
that
cannot be used
o
Discs
that
are
not
round cannot be used.
o
Discs
with coloring on the recording surface or
discs that
are
dirty cannot be used.
o
This
unit
can
only play the
CDs
with
ffiI[i!,:iJ
iii
This
unit
may
not
correctly play discs which
do
not
have the mark.
o
You
cannot playa
CD-R
or
CD-RW
that
has
not
been finalized.
(For
the finalization process refer
to
your CD-RlCD-RW writing software, and your
CD-
R/CD-RW
recorder instruction manual.)
o If you try
to
load a 3-inch-disc
with
its adapter into
the unit, the adapter
might
separate from the disc
and damage the unit.
Other
notes
o If you experience problems during installation,
consult your Kenwood dealer.
o When you purchase optional accessories, check
with your Kenwood dealer
to
make sure that they
work
with
your model and in your
area.
o The characters conforming
to
ISO
8859-1
character
set
can
be displayed.
o The
RDS
or
RBDS
feature won't work where the
service
is
not
supported by any broadcasting
station.
This product includes a non-replaceable
lamp that contains trace amounts
of
mercury.
Please
recycle in accordance
with
your local state regulations. Do
not
dispose
of
in trash.
For
disposal or recycling information,
please contact your local authorities.

Table of Contents

Other manuals for Kenwood KVT-514DVD

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood KVT-514DVD and is the answer not in the manual?

Kenwood KVT-514DVD Specifications

General IconGeneral
BrandKenwood
ModelKVT-514DVD
CategoryCar Receiver
LanguageEnglish

Related product manuals