Kenwood KX-1030 Manual

.,
~KENWOOC
DOLBYIZED STEREO CASSETTE DECKS
KX-1030

Kenwood KX-1030 Specifications

Power

power requirements	AC 120V, 60 Hz - USA & Canada Model, AC 220V, 50 Hz - Australia Model, AC 240V, 50 Hz - U.K. Model
power consumption	13.0 watts

Audio

frequency response normal tape	25 Hz to 17, 000 Hz
frequency response Cr02 tape	25 Hz to 20, 000 Hz
frequency response Ferri-CrOs tape	25 Hz to 19, 000 Hz
signal-to-noise ratio Dolby ON normal tape	65 dB
signal-to-noise ratio Dolby ON Cr02 tape	67 dB
signal-to-noise ratio Dolby OFF normal tape	55 dB
signal-to-noise ratio Dolby OFF Cr02 tape	57 dB
harmonic distortion	Less than 1.3%

Input and Output

input sensitivity/impedance LINE	77.5 mV/56 k ohms
input sensitivity/impedance DIN	10.9 mV/1.5 k ohms
output level/load impedance LINE	775 mV (OVU)/2.0 k ohms
output level/load impedance DIN	775 mV (OVU)/2.0 k ohms
output level/load impedance Headphones	48.9 mV/8 ohms to 16 ohms

Weight and Dimensions

width	430 mm
height	167 mm
depth	332 mm
weight	7.5 kg