To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KX-W4080 and is the answer not in the manual?
General| Type | Double Cassette Deck |
|---|---|
| Recording System | AC Bias |
| Tape Speed | 4.76 cm/s |
| Signal-to-Noise Ratio (Normal Tape) | 58 dB |
| Signal-to-Noise Ratio (Chrome Tape) | 60 dB |
| Signal-to-Noise Ratio (Metal Tape) | 62 dB |
| Motor | DC Servo Motor |
| Power Supply | AC 120V, 60Hz |
| Outputs | Line Out, Headphones |
| Heads | 2 x Playback, 2 x Erase |
Record serial number for service information.
Instructions for careful unpacking and retaining packaging materials.
Lists included accessories like audio cord and system control cord.
Guide to setting the voltage selector switch on the rear panel.
Critical warnings regarding fire, electric shock, and proper usage.
Tips on tape tabs, storage, slack removal, and tape types.
Precautions for condensation and operating temperature ranges.
Detailed steps for cleaning heads, capstan, and pinch rollers.
Procedure to demagnetize the head to prevent sound quality degradation.
How to reset the microcomputer in case of malfunction.
Guidelines for proper unit placement and ventilation for optimal performance.
Explains XS8 and SL16 modes and compatibility.
Describes remote control and automatic/synchronized operations.
Using the system remote for unit operation.
Automatic input switching on amplifier/receiver during playback.
Synchronizing recording from external sources like CD.
Explains transport direction, recording, and pause indicators.
Describes peak level, auto bias, and balance level indicators.
Details on eject, pause, REC/ARM, and fast wind keys for both decks.
Explains keys like REV.MODE, DOLBY NR, DUBBING, and CCRS for the KX-W6080.
Explains keys like REV.MODE, DOLBY NR, and CCRS for the KX-W4080.
Steps to prepare the unit before playing a tape.
Detailed process for inserting tape, selecting direction, and playback conditions.
Steps for inserting tapes, selecting modes, and starting relay playback.
How to skip to desired tunes based on non-recorded spaces.
Rewinds tape to the beginning and starts playback.
Repeats a single tune up to 16 times.
Skips long non-recorded spaces automatically during playback.
Step-by-step process for standard tape recording.
How to adjust the sound input level for recording.
How to adjust the stereo balance for recording.
Adjusting bias for optimal recording with specific tape types (KX-W6080 only).
Explains Dolby B NR and C NR systems for reducing tape hiss.
How to temporarily pause and restart a recording.
Procedures for aborting and re-starting a recording.
Methods to insert blank spaces between recorded segments.
Explanation of Dolby HX Pro's role in improving high-frequency recording.
Steps for inserting tapes, selecting conditions, and setting the relay mode.
Automatic bias adjustment for deck B during relay recording.
Procedures for initiating and stopping the relay recording process.
Steps to synchronize recording from a CD player.
Preparing tapes, selecting modes, and adjusting levels for analog disc recording.
Initiating and stopping synchronized recording from an analog disc.
Steps for setting up and performing CCRS recording from a CD.
How to stop or cancel the CCRS recording process.
Explains normal-speed and high-speed dubbing options.
Steps for inserting tapes, setting direction, and starting dubbing.
How to pause, resume, or stop the tape dubbing process.
Setting up the unit for timed playback of cassette tapes.
Steps to prepare the deck, select tuner station, and set recording levels.
Finalizing timer settings and starting unattended recording.
Procedure to reset the unit's microcomputer for malfunctions.
Lists common symptoms, causes, and remedies for operational problems.
Detailed technical specifications for the KX-W6080 model.
Detailed technical specifications for the KX-W4080 model.
Regulatory information and warnings regarding interference and compliance.
