Need help?Do you have a question about the Kenwood KX-W8050 and is the answer not in the manual?
General| Type | double cassette deck |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Tape Speed | 4.76 cm/s |
| Wow and Flutter (WRMS) | 0.04% |
| Recording System | AC bias |
| Weight | 4.5 kg |
| Motor | DC servo motor |
| Wow and Flutter | 0.08% (WRMS) |
| Input | Line In, Microphone In |
| Output | Line Out |
Details on how to unpack the audio unit and check for shipping damage.
Lists the items included with the audio unit for setup and operation.
Instructions for connecting the unit to the power supply based on regional voltage.
Guidelines on power sources, cords, grounding, and avoiding electric shock.
Precautions for ventilation, heat, moisture, magnetic fields, and cleaning.
Safety advice for moving, non-use periods, service, and antenna grounding.
Tips for using cassette tapes, including safety tabs and storage.
Procedures for cleaning the tape heads, capstan, and pinch roller.
Advice on preventing operational issues caused by condensation.
Diagram and instructions for connecting the unit to external components.
Identification of all buttons, knobs, and indicators on the front panel.
Explanation of the display section and various operation keys for tape control.
Step-by-step guide on inserting a tape and starting playback.
Selecting playback modes, Dolby NR settings, and understanding tape direction indicators.
Explains the Direct Program Search System for track selection.
Functions for scanning tracks and fast winding tape.
Operations for continuous playback, rewind, and skipping blank sections.
Details on the automatic tape direction reversal feature.
Step-by-step instructions for basic tape recording.
Instructions for recording the same source onto two tapes simultaneously.
Procedure for continuous recording from one tape to another.
Recording from a CD player initiated simultaneously with playback.
Recording from a turntable initiated simultaneously with playback.
Automated CD recording with level setting for deck B.
Performing CCRS recording in parallel or relay modes across multiple discs.
Instructions for setting up timed playback of cassette tapes.
Instructions for setting up unattended timer recording of tuner broadcasts.
Steps for copying tapes from Deck A to Deck B at normal or high speed.
Table listing symptoms, causes, and remedies for operational problems.
Addresses issues like high noise, vibrating sound, and immediate playback upon power-on.
Detailed technical data including track system, heads, motors, and frequency response.
To Next Page
