To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KX-W4060 and is the answer not in the manual?
General| Type | Double Cassette Deck |
|---|---|
| Recording System | AC bias |
| Track System | 4-track, 2-channel stereo |
| Tape Speed | 4.76 cm/s |
| Playback Speed | 4.76 cm/s |
| Signal-to-Noise Ratio (Normal Tape) | 54dB |
| Signal-to-Noise Ratio (Chrome Tape) | 56dB |
| Signal-to-Noise Ratio (Metal Tape) | 58dB |
| Wow and Flutter | 0.08% WRMS |
| Heads | 2 x Playback, 2 x Erase |
| Motor | Electronically controlled DC motor |
| Inputs | Line In |
| Outputs | Line Out |
| Frequency Response (Normal Tape) | 30Hz to 16kHz |
| Frequency Response (Chrome Tape) | 30Hz to 17kHz |
| Frequency Response (Metal Tape) | 30Hz to 18kHz |
Displays operational status, levels, and tape counter information.
Details the function of front panel keys for operation and settings.
Explains the usage of playback, recording, and system control keys and switches.
Outlines the purpose of specialized function keys for advanced operations.
Clarifies the standby mode when the unit is plugged in but not powered on.
Details the function of each pin on the CXP82540-105Q microprocessor.
Explains pin behaviors specific to KX-W894/W4060 and KX-W6060 models.
Describes the functions controlled by the slide switches.
Provides instructions for activating and using the system's test mode.
Details adjustments for the cassette mechanism, including head cleaning and alignment.
Describes adjustments for tape speed on the PC board for different modes.
Explains both automatic and manual methods for adjusting playback and recording levels.
