Need help?Do you have a question about the Kenwood M-525DAB and is the answer not in the manual?
General| Type | Home audio micro system |
|---|---|
| Product color | Black |
| Optical disc player | Yes |
| Playback disc formats | CD audio |
| Card reader integrated | No |
| Audio formats supported | MP3 |
| Speaker type | 2-way |
| RMS rated power | 7 W |
| Number of speakers | 2 |
| Equalizer modes | Classic, Flat, Jazz, Pop, Rock |
| Power source | AC |
| Input voltage | 100 - 240 V |
| Input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 15 W |
| Headphone outputs | 1 |
| Headphone connectivity | 3.5 mm |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | DAB, DAB+, FM |
| Preset stations quantity | 20 |
| Display type | TFT |
| Display digits | 2.4 digits |
| Bluetooth range | 10 m |
| Bluetooth version | 5.0 |
Weight and Dimensions| Depth | 240 mm |
|---|---|
| Width | 180 mm |
| Height | 122 mm |
| Weight | 1600 g |
Connect speakers, remote control batteries, and power supply to the device.
Connect the wire antenna and find the optimal placement for reception.
Instructions for switching the radio on/off and navigating system menus.
Programming and managing up to two alarm times with various recurrence options.
Performing automatic and manual searches for receivable DAB+ stations.
Manual/automatic tuning and storing favourite FM stations.
Step-by-step guide for initial pairing and automatic reconnection of Bluetooth devices.
Tips for improving DAB+ and FM radio signal reception.
To Next Page
