Kenwood MultiPro XL Weigh+ FDM72.990BK User Manual (English)

Questions and Answers:

J
Jason CareyAug 13, 2025
How to fix a Kenwood MultiPro XL Weigh+ FDM72.990BK Food Processor that will not operate?
- B
  blake65Aug 13, 2025
  If your Kenwood Food Processor won't operate, first, ensure it's properly plugged into a power source. Then, check that the bowl is correctly fitted to the power unit, with the handle situated towards the right front hand corner. Also, make sure the bowl lid is securely locked into the handle area, as the processor will not work if the bowl and lid are incorrectly fitted. Finally, verify that the detachable drive shaft is fitted onto the power unit before fitting the bowl, as the tools and attachments will not operate without it.
R
Ryan GloverAug 17, 2025
What to do if blender, Blend-Xtract 2GO or mill will not operate on my Kenwood Food Processor?
- C
  Christina SchneiderAug 17, 2025
  If your Kenwood Food Processor blender, Blend-Xtract 2GO, or mill won't operate, ensure it is correctly locked onto the interlock. Also, check that the blade assembly is fully tightened into the glass goblet, bottle, or jar.
A
Austin YuAug 20, 2025
Why is the display screen turned off on my Kenwood MultiPro XL Weigh+ FDM72.990BK?
- J
  Joshua BrewerAug 20, 2025
  If the display screen on your Kenwood Food Processor is turned off, make sure the appliance is plugged in.
A
Adam WilsonAug 25, 2025
Why does my Kenwood Food Processor stop while processing?
- C
  Charles HansonAug 25, 2025
  If your Kenwood Food Processor stops during processing, it might be overloaded or exceeding the maximum capacity. Check the recommended usage chart to ensure you are not exceeding the stated maximum capacities. Also, ensure that the lid is locked correctly, as the processor will stop if the lid becomes unlocked.
W
Wesley HigginsAug 28, 2025
Why does the display screen on my Kenwood MultiPro XL Weigh+ FDM72.990BK Food Processor show '-----'?
- A
  April GravesAug 28, 2025
  If the display screen on your Kenwood Food Processor changes to '-----', it means the same weight reading has been shown for 5 minutes. To resolve this, press the ON/ZERO button once to light up the display screen.
T
Thomas SalinasAug 31, 2025
Why is my Kenwood MultiPro XL Weigh+ FDM72.990BK unstable with heavy vibrations?
- C
  Cindy WilliamsSep 1, 2025
  If your Kenwood Food Processor is unstable or vibrates heavily during use, especially when processing sticky ingredients like dates, it may be due to the speed being too low. For best results, use the 'Pulse' setting first to break down the ingredients, then continue processing on maximum speed.
A
Alisha PatrickSep 4, 2025
Why is the weight not displayed on the screen of my Kenwood Food Processor?
- R
  raymondkerrSep 5, 2025
  If the weight is not displayed on the screen of your Kenwood Food Processor, it could be because the quantity you are weighing is too small. Try using teaspoon and tablespoon measures for very small quantities.
C
Crystal DelgadoSep 8, 2025
What does [0 – Ld] mean on my Kenwood MultiPro XL Weigh+ FDM72.990BK Food Processor display?
- C
  Christopher HortonSep 8, 2025
  If the display on your Kenwood Food Processor shows [0 – Ld], it indicates the weighing function is overloaded. Do not exceed the maximum weighing capacity of 3Kg. It can also indicate that excessive force was applied to the power unit. Avoid subjecting the power unit to excessive force, as this may damage the weighing sensor.