Kenwood Multipro Compact FDM304SS User Manual (English)

Questions and Answers:

L
Larry AndersonJul 29, 2025
What to do if my Kenwood Multipro Compact FDM304SS Food Processor will not operate?
- J
  Jennifer WolfJul 29, 2025
  First, ensure the Kenwood Food Processor is plugged in and receiving power. Check that the bowl is correctly located with the handle towards the right front. Also, verify that the lid interlock is correctly positioned in the handle area, as the processor won't function if the bowl and lid are not properly fitted. Finally, make sure the detachable drive shaft is fitted onto the power unit before fitting the bowl, as the bowl tools and attachments will not operate without it. If all these steps are checked and the processor still does not work, check the fuse/circuit breaker in your home.
J
Jennifer GilesAug 5, 2025
Why does my Kenwood Food Processor stop during processing?
- A
  Alicia JohnsonAug 5, 2025
  Your Kenwood Food Processor might stop during processing due to overloading or exceeding the maximum capacities. Refer to the recommended usage chart for capacity guidelines. Also, ensure that the lid is locked correctly.
P
Paula EdwardsAug 10, 2025
What to do if my Kenwood Food Processor blender or mill will not operate?
- J
  jmackAug 10, 2025
  The blender or mill will not operate if fitted incorrectly to the interlock. Check that the blade assembly is fully tightened into the goblet/jar.
D
Danielle RodriguezAug 16, 2025
What to do if my Kenwood Multipro Compact FDM304SS blender or multi mill is leaking from the blade assembly base?
- N
  nbaldwinAug 16, 2025
  If your Kenwood Food Processor blender or multi mill is leaking from the blade assembly base, check that the seal is fitted correctly and is not damaged. To obtain a replacement seal see ‘Service and customer care’.
C
Cheryl SmithAug 22, 2025
Why is my Kenwood Food Processor unit unstable, vibrating heavily, and moving?
- G
  George FisherAug 23, 2025
  If your Kenwood Food Processor is unstable with heavy vibrations, it could be due to processing sticky ingredients like dates, or selecting too low of a speed. For best results, use 'Pulse' first to break down the ingredients, then continue processing on maximum speed.

Kenwood Multipro Compact FDM304SS Specifications

General

Power	800 W
Bowl Capacity	2.1 L
Blender Attachment	Yes
Number of Speed Settings	2
Pulse Function	Yes
Capacity - liquidiser	1.2 L
Dishwasher safe parts	Yes
Material	Plastic and Stainless Steel