To remove the planet hub:
MX270
The following procedures are aimed to help with dismantling and service repairs.
Always disconnect the appliance from mains supply prior to removal of the covers and suitably protect the finish on the
casings.
Click on the pictures to open a larger version in a seperate window.
The vent cover is secured internally by
3 screws.
Align the hub as shown.
Page 1 of 8Spares - MX270 Disassembly & re-assembly instructions
30/04/2009http://www.kenwoodservice.co.uk/product-files-kar/
uide
MX270.htm
To Next Page
Need help?
General
