To Next PageTo Next Page
Need help?Do you have a question about the Kenwood NX-3200 and is the answer not in the manual?
General| Purpose | Multi-Use Radio Service (MURS) |
|---|---|
| Maximum range | - m |
| Operating frequency | 136 - 174 MHz |
| Wi-Fi | - |
| Bluetooth | Yes |
| Operating temperature (T-T) | -30 - 60 °C |
| Tone squelch | CTCSS/DCS |
| Product color | Black |
| Tones quantity | 5 |
| International Protection (IP) code | IP54, IP55, IP67 |
| Quantity | 1 |
| Battery life (max) | 13.5 h |
Covers safety and operational guidelines for using the transceiver and battery pack.
Lists hazardous locations where transceiver power must be turned off.
Advises against removing the rear black sheet to maintain waterproof efficiency.
Provides warnings regarding modification, airbags, transmission, environment, and accessories.
Details dangers of disassembling, short-circuiting, heating, or immersing the battery pack.
Covers safe charging, piercing, dropping, soldering, and polarity of the battery pack.
Warns against reverse charging, contact with leaking batteries, and abnormal battery usage.
Highlights warnings for overcharging, microwave use, fire proximity, and abnormal battery appearance.
Explains IP67 standard and initial testing for water-resistant models.
Lists precautions to maintain water resistance, including avoiding drops and solvents.
Lists all items included in the transceiver package.
Step-by-step guide for attaching and detaching the optional battery pack.
Instructions for inserting AA alkaline batteries into the optional battery case.
Guide on how to screw the antenna securely onto the transceiver.
Instructions for attaching the belt clip using provided screws.
Procedure for installing the cap over the universal connector.
Guide to connecting speaker, microphone, or headset to the universal connector.
Procedure for covering speaker/microphone jacks to maintain water resistance.
Guide to connecting speaker, microphone, or headset to the specific jacks.
Identifies key controls like Selector and Power/Volume knob.
Describes indicator lights, light bar, and buttons 5 through 11.
Describes the 4-way D-pad, function buttons, and keypad (full button models).
Explains the different areas of the transceiver's display.
Details indicators for signal strength, battery power, and transmission modes.
Lists indicators for Bluetooth, GPS, scanning, priority channels, and encryption.
Lists indicators for messaging, VOX, security functions, and special modes.
Instructions for switching the transceiver on/off and adjusting volume.
Guide on navigating and selecting zones and channels on the transceiver.
Steps for selecting channels and initiating a transmission using the PTT switch.
Explains how to receive signals and the conditions for hearing calls.
Details the open-source licenses governing software used in the transceiver.
