Need help?Do you have a question about the Kenwood RA-90 and is the answer not in the manual?
General| Input Sensitivity | 2.5mV (MM), 150mV (line) |
|---|---|
| Weight | 11.3 kg |
| Total Harmonic Distortion (THD) | 0.03% |
| Signal-to-Noise Ratio | 100dB (line) |
| Speaker load impedance | 4 to 16 ohms |
| Channel Separation | 60 dB |
Information for warranty and service records.
Guide to unpacking and proper placement of the unit.
Essential safety measures for operation, maintenance, and warnings.
Switches for power, tape monitoring, and reverberation effects.
Controls for reverberation time, depth, and input attenuation.
Visual display of reverberation effect strength.
How to connect components and important precautions.
Step-by-step guide for using the amplifier.
Common problems, their causes, and remedies.
Technical details and performance characteristics of the unit.
To Next Page
