Need help?Do you have a question about the Kenwood RA-80 and is the answer not in the manual?
General| Input Sensitivity | 2.5 mV (MM), 150 mV (line) |
|---|---|
| Total Harmonic Distortion | 0.03% |
| Signal to Noise Ratio | 100dB (line) |
| Output | Speaker A, Speaker B |
| Speaker Load Impedance | 4-16 ohms |
Carefully unpack the unit, set aside accessories, and examine for shipping damage. Retain original packaging.
Detailed steps for setting the AC voltage selector switch according to local voltage to prevent damage.
Illustrates how to connect the turntable, pre-main amplifier, graphic equalizer, and power monitor.
Describes the functions of the Power Switch, Left/Right Channel Controls, and Attenuator Switch.
Details the Power switch, Tape Monitor, Reverberation, Effect, Attenuator, Time, and Depth controls.
Describes the Power Switch, LED Peak Power Meter, Meter Range Switch, and Speaker Switch.
Table correlating symptoms like 'No sound' or 'Sound from one side' with potential causes.
Provides remedies such as checking plug/speaker connections, volume, and tape monitor settings.
To Next Page
