To Next PageTo Next Page
Need help?Do you have a question about the Kenwood RXD-653 and is the answer not in the manual?
General| CD Player | Yes |
|---|---|
| Type | Stereo System |
| Functions | CD Player |
| Frequency Response | 20Hz-20kHz |
| Signal to Noise Ratio | 80dB |
| Signal-to-Noise Ratio | 80dB |
| Tuner Bands | FM |
| Speakers | 2 |
Instructions on how to open the tray if it doesn't come out.
Procedures for setting initial conditions and unit initialization.
Lists default settings and destination-based tuner configurations.
Steps to enter/exit test modes and information on error displays.
Operations and displays available within various test modes.
Further details on specific test mode functions and displays.
Block diagram of the microprocessor and its connected components.
Table mapping key inputs to corresponding voltage levels.
Detailed explanation of microprocessor pin functions and I/O.
Procedure for adjusting idle current for specific models.
Procedure for adjusting player laser current.
Adjustments for cassette deck mechanism, tape speed, and bias.
Board adjustments and required measurement equipment connections.
Details on capacitor types, values, and coding.
Details on resistor types, values, and coding.
Dimensions and rating wattage for chip components.
List of parts for specific model series.
List of parts for other model series.
List of parts for remaining model series.
Parts specific to the power amplifier and sub-circuit units.
List of parts for the CD mechanism.
Explanation of abbreviations and reading conventions for the parts list.
Performance details for amplifier and cassette deck.
Performance details for CD player and overall unit.
