Type ..........................Subwoofer system with built-in amplifier
(Magnetically shielded)
[Amplifier]
Rated Output Power .........150 W RMS, 30 Hz ~ 200 Hz, 4 Ω
Phase Switching ....................................NORMAL, REVERSE
Input Sensitivity & Input Impedance
RCA-type pin-plug jack ..............................100 mV /12 kΩ
200 mV /12 kΩ (MONO Input)
Push-type terminals ......................................1.7 V (15 kΩ)
[Speaker]
Enclosure ...........................Bass-Reflex, Floor Standing Type
Speaker Unit .....................................250 mm (10") Cone type
Nominal Impedance ...........................................................4 Ω
[General]
Rated Power Consumption .............................................50 W
Dimensions ....................................Width : 294 mm (11-9/16")
Height: 457 mm (18")
Depth: 415 mm (16-5/16")
Net Weight .....................................................15.2 kg (33.5 lb)
* Refer to parts list on page 9.
Grille ass'y
(B06-1497-08): B
(B06-1498-08): W
AC power cord *
(E30-)
Button(POWER)
(K29-0585-08): B
(K29-0589-08): W
Sensor lens
(B19-1289-08)
Knob(VOLUME)
(K29-0586-08): B
(K29-0591-08): W
Control panel
(A21-3341-08): B
(A21-3343-08): W
B : Black
W: White
Lens
(B19-1290-08)
Lens
(B19-1291-08)
Knob(CONTROL)
(K23-0542-08): B
(K23-0546-08): W
Button(CONTROL)
(K29-0587-08): B
(K29-0588-08): W
SPECIFICATIONS
KENWOOD follows a policy of continuous advancements in
development. For this reason specifications may be
changed without notice.
• Sufficient performance may not be exhibited at extremely
cold locations (where water freezes).
To Next Page
Need help?
General
