Need help?Do you have a question about the Kenwood T-599S and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | T-599S |
| Category | Transmitter |
| Language | English |
Steps to diagnose and resolve power supply issues.
Steps to diagnose why fuses blow frequently.
Diagnosing and resolving the absence of CW output.
Diagnosing and resolving low CW output levels.
Diagnosing and resolving the absence of SSB output.
Diagnosing and resolving low output during transceiving.
Setting carrier level and RF meter sensitivity for accurate readings.
Balancing the modulator and setting the carrier position.
Setting VFO output voltage and oscillating frequency.
Ensuring proper heterodyne crystal operation and frequency.
Tuning mixer and drive plate coils for each band.
Adjusting the band-pass filter for prescribed bandwidth.
Setting the microphone gain (VR1) for optimal input.
Establishing the correct final stage base current.
Stabilizing the final stage transistor action.
Setting side tone output and verifying semi-break-in.
To Next Page
