How to fix Kenwood TK-2300 that cannot turn on?
If your Kenwood Transceiver won't turn on, the battery pack may be dead. Try to recharge or replace the battery pack. Also, the battery pack may not be installed correctly. Remove the battery pack and install it again.
Why can't I talk to or hear other members in my group on my Kenwood Transceiver?
If you can't communicate with other members of your group on the Kenwood Transceiver, first ensure that you are using the same frequency and QT/DQT settings. If that doesn't work, other group members may be using the Scrambler function, so turn on your transceiver’s Scrambler. Finally, other group members may be too far away, so make sure you are within range of the other transceivers.
What to do if I hear other voices on the channel of my Kenwood TK-2300 Transceiver?
If you are hearing voices besides those of your group members on the channel of your Kenwood Transceiver, change the QT/DQT settings. Make sure all group members change the settings on their transceivers to match the new QT/DQT setting.
Why does my Kenwood TK-2300 battery die quickly after charging?
If the battery power of your Kenwood Transceiver dies shortly after charging, the battery pack life is finished. Replace the battery pack with a new one.
General| Frequency Range | 136-174 MHz |
|---|---|
| Channel Capacity | 16 |
| Power Output | 5W |
| Channel Spacing | 12.5/25 kHz |
| Modulation | FM |
| Operating Temperature | -30°C to +60°C |
| Type | Handheld |
| Operating Voltage | 7.5 V |
To Next Page
