To Next PageTo Next Page
Need help?Do you have a question about the Kenwood TK-2312 and is the answer not in the manual?
General| Frequency Range | 136-174 MHz |
|---|---|
| Channels | 128 |
| Channel Spacing | 12.5/25 kHz |
| Power Output | 5W |
| Operating Voltage | 7.4 V |
| IP Rating | IP54 |
| Operating Temperature | -30°C to +60°C |
| Type | Portable |
| Weight | 300 g |
| MIL-STD | MIL-STD-810 |
| Modulation | 16K0F3E/11K0F3E |
Critical safety warnings for operating the transceiver in hazardous locations or situations.
Safety cautions regarding potential damage or misuse of the transceiver and its components.
Detailed dangers associated with mishandling or damaging the battery pack.
Step-by-step guide on how to attach and detach the optional battery pack from the transceiver.
Procedure for charging the battery pack using the optional charger, including indicator status.
Control for changing operating zone or channel.
Control for turning the transceiver on/off and adjusting audio volume.
Push-to-talk button used for transmitting audio.
How to turn the transceiver on and off using the power switch.
Procedure for entering a password to unlock a protected transceiver.
Method for setting the audio volume level using the volume control.
How to transmit audio, including microphone positioning and PTT usage.
How to receive audio and adjust volume during calls.
How to initiate and receive selective voice calls to specific stations or groups.
Security feature to disable a lost or stolen transceiver remotely.
Steps to initiate selective calls using the Selcall function.
How to activate and use the hands-free VOX transmission feature.
How to make emergency calls using the dedicated function.
Safety feature that automatically enters emergency operation if inactivity is detected.
