EasyManua.ls Logo

Kenwood TK-2180 User Manual

Kenwood TK-2180
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
© B62-1759-10 (K)
09 08 07 06 05 04 03 02 01
INSTRUCTION MANUAL
VHF FM TRANSCEIVER
TK-2180
TK-3180
UHF FM TRANSCEIVER

Table of Contents

Other manuals for Kenwood TK-2180

Question and Answer IconNeed help?

Do you have a question about the Kenwood TK-2180 and is the answer not in the manual?

Kenwood TK-2180 Specifications

General Specifications IconGeneral Specifications
frequency range136~174MHz
number of channelsMax. 512 channels total per radio
zoneMax. 128 per radio
channel spacingWide 5k : 25kHz, Wide 4k : 20kHz, Narrow : 12.5kHz
battery voltage7.5V DC ± 20%
Battery IconBattery
battery life with KNB-31AApprox. 9 hours
battery life with KNB-32NApprox. 14 hours
battery life with KNB-33LApprox. 10 hours
Operating Environment IconOperating Environment
operating temperature range–30°C~+60°C (–10°C~+60°C with KNB-32N or KNB-33L)
frequency stability± 2.5ppm (–30°C~+60°C)
antenna impedance50Ω
Receiver IconReceiver
sensitivity EIA 12dB SINADWide 5k : 0.28µV, Wide 4k : 0.28µV, Narrow : 0.32µV
EN 20dB SINADWide 5k : –3dBµV, Wide 4k : –3dBµV, Narrow : –2dBµV
adjust channel selectivityWide 5k : 73dB, Wide 4k : 73dB, Narrow : 63dB
Transmitter IconTransmitter
RF power outputHI : 5W, LO : 1W
modulation limitingWide 5k : ± 5.0kHz at 25kHz, Wide 4k : ± 4.0kHz at 20kHz, Narrow : ± 2.5kHz at 12.5kHz
spurious emission–36dBm ≤ 1GHz, –30dBm > 1GHz
Weight and Dimensions IconWeight and Dimensions
dimensions with KNB-33L battery58 x 136 x 33 mm
dimensions with KNB-31A or 32N battery58 x 136 x 39.5 mm
weight400 g with battery (KNB-33L), antenna (KRA-22) and belt-clip (KBH-11)

Summary

Unpacking and Checking Equipment

Preparation

Battery Pack Precautions

Essential safety guidelines for handling and charging battery packs to prevent damage or injury.

Programmable Functions

Operating Basics

Transceiver Password

Procedure for setting and entering a password to secure the transceiver.

Trunking Zones

Placing a Dispatch Call

Steps to initiate a dispatch communication within a trunking zone.

Conventional Zones

Transmitting

Steps for transmitting voice communications in conventional zones.

Quiet Talk (QT)/ Digital Quiet Talk (DQT)

Explanation of tone/code signaling for selective call reception and transmission.

Operator Selectable Tone (OST)

Voice Operated Transmission (VOX)

Scan

Priority Scan

Group Scan

FleetSync: Alphanumeric 2-Way Paging Function

Selcall (Selective Calling)

How to perform voice calls to specific stations or groups using Selcall.

DTMF (Dual Tone Multi Frequency) Calls

DTMF Signaling

Emergency Calls

Scrambler

Related product manuals