Kenwood TR-2500 User Manual

Instructions on charging the battery pack using the AC charger.

Selects simplex or repeater operation modes.

Checks repeater input by interchanging frequencies.

Sets transmit output power to high or low.

Details on various keys for operation and memory.

How to enter frequencies using the set keys.

How to shift frequency up or down by 5 kHz steps.

Procedure for storing frequencies into memory channels.

How to retrieve stored frequencies from memory.

Steps to erase stored memory channels.

Procedure for setting up program scan parameters.

How to set the scan range and step increment.

Steps for receiving signals with the transceiver.

Steps for transmitting signals with the transceiver.

Explanation of the four positions of the TX-OFFSET switch.

How to operate the transceiver in repeater mode.