Need help?Do you have a question about the Kenwood TR-7930 and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | TR-7930 |
| Category | Transceiver |
| Language | English |
Instructions and notes for handling the transceiver after removing it from its packaging.
Highlights of the TR-7950, including its LCD, memory channels, power output, and operational modes.
Details on features like band scan, sub-tone channels, autopatch, front panel control, and extended frequency coverage.
Critical checks and precautions before operating the transceiver, including polarity and environmental factors.
Important warnings regarding installation location and avoiding direct sunlight or heat.
Details on general characteristics, including semiconductors, frequency range, power, and operating environment.
Technical specifications for the transmitter, covering output power, modulation, and frequency tolerance.
Technical specifications for the receiver, including sensitivity, selectivity, and squelch performance.
Procedure for connecting the antenna and power supply for fixed station setup.
Guidance for installing the transceiver in a vehicle, including location, antenna, and power connections.
Specific aspects of mobile installation, covering position, bracket mounting, antenna, and cable routing.
Guidance on power supply selection and antenna choice for fixed station setups.
Detailed description of front panel controls, LCD display, and indicators.
Explanation of keyboard functions, memory selector, indicators, and switches on the front panel.
Description of rear panel connectors and switches, including antenna, power, and external speaker terminals.
Initial setup and precautions before operating the transceiver, including frequency range and input methods.
How to adjust the squelch control for optimal noise elimination and scan operation.
Step-by-step procedures for storing frequencies and settings into memory channels.
Instructions for updating or replacing existing frequencies stored in memory channels.
Guide to performing memory scan, band scan, and priority channel scan operations.
Methods to cancel or stop an ongoing scan operation.
Procedure for selectively skipping unwanted memory channels during scan.
Steps to designate a specific memory channel as the priority channel.
How to use the PRIORITY OPER switch to access the priority channel frequency.
Instructions for using the autopatch feature during transmit mode.
Guide to adjusting the scan timer delay for TO scan mode.
Procedure for adjusting the sidetone and beeper volume levels.
Explanation of 'odd split' frequency shifts using paired memory channels (16-17, 18-19).
Instructions for installing the optional TU-79 sub-tone unit.
Overview of transceiver alignment, testing, and recommended service procedures.
Explanation of how the transmitter's final module is protected against reflected power (high SWR).
Important precautions regarding the vehicle battery when charging or jump-starting the transceiver.
Information required when ordering replacement parts, including model and part numbers.
Guidelines for returning the equipment for repair and claiming warranty service.
Details on the KPS-12A power supply, compatible with TR-7950 and TR-7930.
Information about the SP-40 external speaker, designed for mobile operation.
Description of the TU-79 tone unit for adding sub-tone capabilities.
To Next Page
