Kenwood VRS-7100 User Manual

B60-5462-10 02 MA ( K, P, E, X ) 0312
AUDIO VIDEO SURROUND RECEIVER
VRS
-
7100
INSTRUCTION MANUAL
KENWOOD CORPORATION
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has
several operation modes. These modes enable the remote control to control other audio/video
components. In order to effectively use the remote control it is important to read the operating
instructions and obtain a proper understanding of the remote control and how to switch its
operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the
operation modes may result in incorrect operations.
Quick Start Reference
Please read the following pages so that you can enjoy the surround sound at the best
condition.
(These pages give shortcut explanations on how to connect the speaker system to the
receiver, set up the speakers and play a source.)
"Let's play DVD video software" )¡, ™£

Kenwood VRS-7100 Specifications

Audio Specifications

sampling frequency	32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
rated power output (8 Ω)	70 watts per channel
rated power output (6 Ω)	100 watts per channel

Video Specifications

input sensitivity / impedance (Composite)	1 Vp-p / 75 Ω
input sensitivity / impedance (S VIDEO)	1 Vp-p / 75 Ω
input sensitivity / impedance (COMPONENT VIDEO)	1 Vp-p / 75 Ω

FM Tuner Specifications

tuning frequency range	87.5 MHz ~ 108 MHz
usable sensitivity (MONO)	1.3 µV (75 Ω)/ 13.2 dBf
50 dB quieting sensitivity (STEREO)	28 µV (75 Ω)/ 40.2 dBf

AM Tuner Specifications

tuning frequency range (U.S.A., Canada)	530 kHz ~ 1, 700 kHz
tuning frequency range (Australia)	531 kHz ~ 1, 602 kHz
usable sensitivity	16 µV / (600 µV/m)

General Specifications

power consumption	85 W
dimensions	W: 440 mm, H: 079 mm, D: 364 mm
weight (Net)	4.4 kg (9.7 lb)