To Next PageTo Next Page
Need help?Do you have a question about the Kenwood XD-552 and is the answer not in the manual?
General| CD Player | Yes |
|---|---|
| Tuner | Yes |
| Bluetooth | No |
| USB Port | No |
| FM Tuning Range | 87.5 - 108 MHz |
| Remote Control | Yes |
| Type | Stereo System |
| Components | Amplifier, CD Player, Tuner |
| Tuner Bands | FM/MW |
| CD Player Type | Single |
| Signal-to-Noise Ratio | 90dB (CD) |
Ensures safe electrical connections and cord handling for the fitted mains plug.
Explains how to set the AC voltage selector switch to match the local line voltage.
Crucial warnings to prevent fire, electric shock, and damage to the appliance.
Safe handling of power cords, polarized plugs, and electrical connections.
Warnings against internal contact and electric shock hazards.
Detailed guide on connecting speakers and ensuring correct polarity.
Identifies and explains the functions of the main unit controls.
Explains the controls and indicators for the receiver section.
Details the functions of each button on the remote control unit.
Using the multi control jog dial to set various functions.
Procedures for loading discs and initiating CD playback.
Reviewing, replacing, adding, or deleting programmed tracks.
How to select and play specific tracks using numeric keys.
Steps for loading tapes and initiating playback.
Methods for tuning and memorizing broadcast stations.
Automatically presets available stations using the TUNING MODE key.
Steps for loading a cassette and setting tape direction.
Choosing the audio source and initiating the recording process.
Loading tapes and selecting transport directions for dubbing.
Choosing dubbing modes and starting the copying process.
How to select tracks in a desired sequence for playback.
Entering track numbers in the desired order for program playback.
Repeating a single track multiple times.
Repeating all discs in the player sequentially.
Repeating an entire disc multiple times.
Repeating only the programmed tracks.
Playing tracks randomly from a single selected disc.
Playing tracks randomly from all loaded discs.
Using PTY search and referencing the program type list.
How to select program types using keys or numeric input.
Recording specific tracks during CD playback.
Recording an entire CD directly from playback.
Recording programmed tracks from multiple discs.
Creating and storing custom equalizer settings.
Adjusting the unit's internal clock for accurate time display.
Finalizing timer reservations for playback or recording.
Steps to reset the microcomputer for troubleshooting.
Solutions for common problems with receivers and speakers.
