ERROR CODE DESCRIPTION ACTION TO REMEDY ERROR
E04
Unit operating at high
temperature.
Allow unit to cool. Ensure
correct cooking utensil type is
used. Lower the cooking level or
temperature setting.
E06
E07
E08
E09
Internal electronic control issue. Refer to Kenyon Customer
Care.
E10
More than two control functions
activated at the same time for
three seconds, unit de-powered.
Re-power unit and command
one control input at a time.
TROUBLESHOOTING INDEX
The Kenyon Grill is a sealed unit that does not require regular maintenance. Please follow our
operating instructions as mentioned above. If your grill requires service, this must be preformed by
Authorized Personnel only. Please call Kenyon Customer Care at 860-664-4906.
KENYON GRILL MAINTENANCE
De-power and re-start the unit to clear the
display. Allow the unit to cool as necessary.
Lock out the main power supply to the unit by
closing the breaker before performing any
wiring operations. If the problem persists,
please call Kenyon Customer Care at
860-664-4906, M-F, 8AM – 5PM EST or email
at customercare@cookwithkenyon.com.
Error Code Readout
In the event that the Kenyon Grill is not
operating correctly, the control readout will
display an error code that will identify the
problem. If an error code is shown on the
display, identify the code in the troubleshooting
index below and take action as noted.
13
Grill Operation
To Next Page
Loading...
