16
CALIBRATION
Upon application of electrical power to the
grill, the controller will run a self-calibration
process. The controller will then sound an
audible conrmation tone and the display
will briey illuminate. The grill is now ready
to be used.
ON/OFF
ENERGIZING THE GRILL
To turn the grill ON, touch and hold the Master
Power Sensor for two seconds. The controller
will then beep and the Power On Indicator
will illuminate.
POWER ON
INDICATOR
ON/OFF
MASTER
POWER SENSOR
POWER LEVEL
DISPLAY (HEAT
SETTING 8
SELECTED)
HEAT SETTINGS
Your KENYON grill has 8 different heat set-
tings, from 1 through 8, selected using the (-)
and (+) sensors. The heat setting is displayed
as shown at the right. The heating element
cycles at different time intervals to vary the
heat level. As the setting is increased, the heat-
ing element will remain on for a longer period,
increasing the cooking temperature of the grill.
ON/OFF
To Next Page
Loading...
Need help?
General
