Kenyon frontier Use & Care Guide - Installation Manual

18
Power Cord
GROUND FAULT
CIRCUIT INTERRUPTER
GFCI
Fig. 5
RESET
BUTTON
GROUNDED 3-PRONG PLUG
INDICATOR
LIGHT
TEST
BUTTON
240V MODELS
GROUND FAULT CIRCUIT
The supply voltage circuit (240V) should
be equipped with a ground fault circuit
interrupter. Check local codes for
compliance.
THIS PERTAINS TO 120V
MODELS ONLY
GROUND FAULT CIRCUIT
INTERRUPTER (GFCI)
The GFCI is a safety device designed to
protect the user from any electrical shock
hazard.
INDICATOR LIGHT
The indicator light will stay illuminated when
electrical power is applied and indicates that
the GFCI is working properly.
TEST/EMERGENCY OFF BUTTON
Pressing this button will test the GFCI.
The indicator light will go out and electrical
power will not be supplied to the grill. The
GFCI should be tested monthly.
RESET BUTTON
Pressing this button will reset the GFCI to
its normal function. The indicator lamp will
illuminate and electrical power will be
supplied to the grill. If the indicator lamp
does not illuminate, the GFCI has detected
a malfunction. Unplug the GFCI from the
receptacle and do not use the grill.
GROUNDED 3-PRONG PLUG
CAUTION - To ensure continued protection
against risk of electric shock, the GFCI must
be plugged into a properly grounded
receptacle.
DO NOT USE AN EXTENSION CORD

Kenyon frontier Specifications

General

Brand	Kenyon
Model	frontier
Category	Grill
Language	English