12. To clean the grill, rst be sure the cooking surface has cooled enough to handle. Then
remove the grates, lift up the electric elements until they lock in the up position, remove the
middle grate support cross bar, then the drip trays. The grate support cross bar is removed by
lifting the rear and pulling the front notch off of the supporting tab. To install the support reverse
the procedure. Do not cook on the without the support in place!
13. Wipe the stainless steel surfaces with a damp cloth to remove any residue
from previous grilling sessions.
14. Your Kenyon grill came with a sample bottle of stainless steel cleaner.
Use this cleaner once a month to keep your grill looking like new.
15. The touch control area is ceramic glass which is sealed from the effects of rain, snow and
ice. To clean the glass, use a glass cleaner and soft towel. If stains appear, use a ceramic glass
cleaner which can be found in your local grocery store.
6
To Next Page
Loading...
Need help?
General
