Why does the flame extinguish after releasing the FFD button on my Kenyon Cooktop?
If the flame extinguishes after you release the FFD button on your Kenyon Cooktop, it might be because the FFD hasn't reached its operating temperature. To fix this, hold the button down for at least five seconds after the burner ignites. This allows the unit to operate properly.
Why won't the lid stay up on my Kenyon KISS?
If the lid of your Kenyon Cooktop will not stay up, the lidstay leafspring might be broken. You should obtain a replacement lid assembly.
What to do if fuel canister is self-refrigerated and/or regulator is hot on Kenyon Cooktop?
If the fuel canister of your Kenyon Cooktop is self-refrigerated and/or the regulator is hot, wait until it cools down, then try again.
Essential safety warnings and guidelines for use.
Procedures for physically installing the unit into a countertop.
Guidelines for safe placement away from flammable materials.
Instructions for preparing the counter and fitting the subpan.
Guidance on connecting and routing the vent system.
Detailed sequence for installing the complete vent system.
Step-by-step guide for fuel loading and burner ignition.
Methods for identifying and verifying gas leaks.
Diagnosing and resolving typical operational issues.
Terms and conditions of the product warranty.
General| Color | Black |
|---|---|
| Burner Type | Induction |
| Type | Induction |
| Surface Material | Ceramic Glass |
| Control Type | Touch Control |
| Material | Ceramic Glass |
To Next Page
