What to do if my Kenyon SILKEN 2 Cooktop displays E03 or E04?
If your Kenyon Cooktop displays error codes E03 or E04, allow the unit to cool down. Also, ensure you are using the correct type of cooking utensil. Finally, try lowering the cooking level or temperature setting.
What to do if my Kenyon SILKEN 2 Cooktop displays E05?
If your Kenyon Cooktop displays error code E05, allow the unit to cool down. Ensure that the cooking vessel with food inside is placed on the cooktop before turning on the burner.
Why does my Kenyon SILKEN 2 display E01?
Ensure that the electrical hookup voltage to your Kenyon Cooktop is correct by referring to the identification label affixed to the underside of the unit.
Why does my Kenyon SILKEN 2 display E02?
Ensure that the electrical hookup voltage to your Kenyon Cooktop is correct. Refer to the identification label affixed to the underside of the unit.
What to do if my Kenyon Cooktop displays E10?
If your Kenyon Cooktop displays error code E10, try re-powering the unit and commanding one control input at a time.
Ensure appliance is properly installed and grounded by a qualified technician.
Keep children supervised and prevent them from playing with or climbing on the appliance.
Avoid wearing loose or flammable clothing to prevent burns or ignition.
Only authorized personnel should repair or replace appliance parts.
Do not store flammable materials or plastic items near or under the cooktop.
Do not use water on grease fires; use dry chemical or foam-type extinguisher.
Use dry potholders and avoid touching hot surface units or surrounding areas.
Do not cook on a broken cooktop; clean with caution to avoid burns or damage.
Use proper pan size, ensure cookware is dry, and turn handles inward.
Never leave units unattended at high heat; avoid aluminum foil and plastic.
Keep the manual for future reference.
Carefully unpack the cooktop, retain packaging, and verify contents for any missing or damaged items.
Verify voltage, amperage, and frequency meet product specifications and local codes.
Plan countertop cutout dimensions and clearances, ensuring adequate ventilation.
Secure the cooktop using mounting brackets and bedding compound, ensuring proper sealing.
Connect conductor wires to electrical service according to national, state, and local codes.
Remove protective film and clean the cooktop before initial use.
Explains how induction cooking works, its cookware requirements, and benefits.
Details the lock feature, powering up, and hot surface indicator.
Describes heat level and temperature cooking modes, including unit selection.
Explains automatic power sharing and the use of kitchen and cooking timers.
Provides instructions for cleaning the cooktop and general maintenance procedures.
Displays error codes and provides guidance on their meaning and resolution.
Details the warranty period, coverage, and limitations on liability for defects and damages.
Outlines items not covered by warranty and disclaims implied warranties and consequential damages.
To Next Page
General
