Kenyon SILKEN 2 - Cooking Modes and Settings

15
INDUCTION COOKTOP COOKING OPTIONS- HEATING LEVEL OR
COOKING TEMPERATURE
The induction cooktop burners can be independently operated by either a heating level ranging
fromlowtohigh,orbysettingaspeciccookingtemperature.
Powersharingbetweenburnerswilltakeeffectwhenbothburnersareused.RefertothePower
Sharingsectionofthismanualonpage15.
HEAT LEVEL COOKING MODE
Withtheunitpoweronandtheburnerpoweredup,swipeyourngeralongthetemperature
controlarcandreleaseatthedesiredsetting.ThesettingsrangefromLOW-MED-HIGHin16
increments, as indicated by the LED light array that illuminates along the control sweep. Also, the
arc + and – signs can be toggled to select the desired heat level. The LED light array will indicate
theselectedsetting.RefertoFigureE.
Thedefaultheatleveluponstartingeitherburneris0.Iftheburnerissetorremainsat0for15
secondsofinactivity,theburnerwillde-power.
MAIN POWER
CONTROL FRAME
LOCK FEATURE
STANDBY LIGHT
POWER BUTTON
MAIN POWER AND SAFETY LOCK
HOT SURFACE INDICATOR
BURNER CONTROL
FRAME
HEATING LEVEL
CONTROL SWEEP
+ BUTTON
- BUTTON
BURNER CONTROL FRAME
HEATING LEVEL COOKING MODE
16 LED LIGHT ARRAY
TEMPERATURE COOKING
MODE BUTTON
COOKING TEMPERATURE
READOUT
+ BUTTON
- BUTTON
BURNER CONTROL
FRAME
TEMPERATURE COOKING MODE
TEMPERATURE UNITS AND TIMERS
TEMPERATURE UNIT
SELECTOR BUTTON
MAIN POWER
CONTROL FRAME
KITCHEN AND
COOKING TIMER
6
5
4
2
HOT SURFACE INDICATOR
Fig. E