KEPCO ABC-DM Series User Manual

IMPORTANT NOTES:
1) This manual is valid for the following Model and associated serial numbers:
MODEL SERIAL NO. REV. NO.
2) A Change Page may be included at the end of the manual. All applicable changes and
revision number changes are documented with reference to the equipment serial num-
bers. Before using this Instruction Manual, check your equipment serial number to identify
your model. If in doubt, contact your nearest Kepco Representative, or the Kepco Docu-
mentation Office in New York, (718) 461-7000, requesting the correct revision for your par-
ticular model and serial number.
3) The contents of this manual are protected by copyright. Reproduction of any part can be
made only with the specific written permission of Kepco, Inc.
Data subject to change without notice.
KEPCO®
THE POWER SUPPLIER™
MODEL
OPERATOR’S MANUAL
ORDER NO. REV. NO.
KEPCO, INC.  131-38 SANFORD AVENUE  FLUSHING, NY. 11355 U.S.A.  TEL (718) 461-7000  FAX (718) 767-1102
email: hq@kepcopower.com  World Wide Web: www.kepcopower.com
KEPCO INC.
An ISO 9001 Company.
ABC-DM SERIES
SWITCHING POWER SUPPLY
VOLTAGE/CURRENT-STABILIZED DC SOURCE
ABC-DM SERIES
POWER SUPPLY
©2017, KEPCO, INC
P/N 243-0888-r3

KEPCO ABC-DM Series Specifications

General

Input Frequency	47-63Hz
Storage Temperature	-40°C to +85°C
Number of Outputs	Single
Isolation	3000 VAC
Operating Temperature	-20°C to +70°C
Safety Approvals	UL, CE
Dimensions	Varies by model
Weight	Varies by model