KEPO AC 20 - User Manual

Dear user,
Please read this manual carefully before installing and commissioning the boiler.
We wish you a warm and pleasant winter.
Kepo
1

Summary

Introduction and Installation Overview

Installing on Central Heating

Guidance on correctly installing the boiler within the central heating system.

General Safety Precautions

Installation Requirements

Minimum Clearance and Ventilation

Specifies minimum distances and room ventilation for safe boiler installation.

Flue Gas, Electrical, and Positioning

Dimensions and Connections

Dimensions for AC;MC 35 Models

Safety Precautions

Chimney System Installation

Chimney Requirements and Connection

Conditions for chimney compliance and visual guide for proper connection.

Connecting and Commissioning the Boiler

Boiler Connection Steps

Steps for connecting the boiler to heating and air systems.

Initial Commissioning Procedure

Procedures for the first commissioning and startup of the boiler.

Operating Instructions

Control Panel Interface

Overview of the control panel display and basic functions like power on/off.

Startup and Operation Modes

Detailed steps for boiler startup, flame stabilization, and work modes.

Temperature and Power Adjustment

Modulation and Stand-by Modes

Cleaning and Shutdown Procedures

Miscellaneous Settings

Automatic Operation Programming

Alarm Management

Alarm Codes and Troubleshooting

List and explanation of various alarm codes and their associated causes.

Boiler Cleaning and Maintenance

Heat Exchanger Cleaning

Fire Pot and Casing Maintenance

Ash Pan and Back Chamber Cleaning

Warranty Statement

KEPO AC 20 Specifications

General

Power	2000W
Voltage	220-240V
Frequency	50/60Hz
Material	Stainless Steel
Safety Features	Overheat protection