KERN ADJ 200-4 User Manual

28 ADB_ADJ-BA-e-2032
12.3.2 Output condition
The data transfer type is determined in this menu item
Call up menu item „C5“, see chap. 11.1
Use the PRINT key to select the desired setting.
Options:
C5 - 0
Automatic output of stable weighing values
C5 - 1
Via remote control command W (w)
C5 - 2 Continuous data output
C5 - 3 Output for stable and instable weighing values
after pressing PRINT key
Save / back to weighing mode, see chap. 11.1
12.4 Sample protocols (KERN YKB-01N)
+ 10.0000 g s Stable/positive weighing value
- 10.0000 g us Instable/negative weighing value
100 pcs s Parts counting (stable weighing value)
49.99 % s Percentage determination (stable weighing value)
12.5 Remote control instructions
Command Terminator
Function
ASCII Hex <CR> <LF>
O 4F 0D 0A
Function such as ON/OFF key
T 54 0D 0A
Function such as TARE key
C 43
0D
0A
Function such as CAL key
M 4D
0D
0A
Function such as MODE key
W 57
0D
0A
Function such as PRINT key
w 77
0D
0A
Function such as PRINT key

KERN ADJ 200-4 Specifications

General

Brand	KERN
Model	ADJ 200-4
Category	Scales
Language	English