Need help?Do you have a question about the KERN DS 8K0.05 and is the answer not in the manual?
General| Capacity | 8 kg |
|---|---|
| Readability | 0.05 g |
| Calibration | External calibration |
| Display | LCD |
| Reproducibility | 0.05 g |
| Power Supply | 230 V AC |
Identification of physical parts and features of the balance.
Details on the function of each button on the balance's keypad.
Explanation of how to enter numerical values using the balance controls.
Interpretation of the symbols and information shown on the balance display.
Instructions on intended use and correct operation of the balance.
Warnings and examples of incorrect or unsafe ways to use the balance.
Conditions under which warranty claims may be voided.
Procedures for regular calibration and verification of balance performance.
Emphasizes the importance of reading the manual before use.
Requirement for trained staff to operate and maintain the appliance.
Procedure for checking the balance for damage upon delivery.
Instructions for proper packaging and shipping of the balance.
Recommendations for choosing an optimal and safe installation environment.
Process for removing the balance from packaging and verifying its contents.
Steps for setting up the balance, including ensuring it is level.
Instructions for connecting the balance to the power supply.
Details on using the optional battery for portable operation.
Guidance on connecting external devices like printers or PCs.
Steps to perform before the first use to ensure accurate operation.
Process for calibrating the balance using a known external weight.
Calibrating using a user-specified weight.
Setting the balance for local gravity variations.
Adjusting for geographical variations in gravity.
Instructions for powering the balance up and down.
Basic steps for performing a standard weighing operation.
How to reset the balance to zero before weighing.
Procedure for subtracting the weight of a container.
Explanation of the multi-function button's default operations.
Method for weighing large or irregularly shaped items using a lower platform.
Guide to choosing the correct operating mode (e.g., weighing, counting).
Procedure for switching between different operational modes.
Configuration options relevant to the weighing application.
Function for setting a pre-defined tare value.
Feature to freeze the displayed weight value.
Options for selecting and configuring measurement units.
Configuration options relevant to the counting application.
Process for counting items based on average piece weight.
Function for counting items within predefined quantity limits.
Configuration options relevant to the checkweighing application.
Setting a target weight and checking if items meet it.
Verifying if the weight of an item falls within specified limits.
General steps for moving through menu options.
Accessing specific application settings and modes.
Summary of all available setup options and their parameters.
Description of the protocol used for data exchange.
Features related to data output and printing.
Options for structuring the data transmitted from the balance.
Instructions on how to clean the balance safely and effectively.
Procedures for professional maintenance and repair.
Guidelines for environmentally sound disposal of the balance.
Quick guide to common problems and their solutions.
Explanation of error codes displayed by the balance.
To Next Page
