KERN YKB-01N - Declaration of Conformity; Unpacking; Positioning and Start-up

4 TYKB-01-A-BA-e-2310
2 Declaration of Conformity
The valid Declaration of Conformity EC/UE is available at:
www.kern-sohn.com/ce
3 Unpacking
Scope of delivery:
• Printer
• Power supply
• Adapter cable
• User manual
If any of the above products are missing, contact the sales representative immediately.
4 Positioning and start-up
The printer should be used solely in the following ambient conditions:
• Temperature: 0-50°C
• Humidity: 20–70% (non-condensing)
When selecting the installation place, follow the following rules:
• Protect from dust and water splashes.
• Do not place the printer near strong heat sources.
• Do not place the device near strong pulsed electric, magnetic and
electromagnetic fields and surfaces accumulating static charges.
• Avoid direct sunlight, impact and vibrations.
Power is supplied via a power supply.
The printed voltage value must be consistent with the local mains voltage.
Always use the original power supply by KERN.
Using any other products requires KERN consent.