KERN YKB-01N - DPL Report

TYKB-01-A-BA-e-2310 9
12 DPL report
a. Enter the DPL mode, pressing the left button when the printer is being switched.
b. Leave the DPL mode, pressing the right button.
The report below will be created. It may be filled in manually later on:
Adjustment
documentation (DPL)
Date:
Time:
Scale
Manufacturer:
___________________
_____________________________________________
Model:
___________________
_________________________________________
Serial no.:
___________________
_________________________________________
ID:
___________________
_________________________________________
Adjustment weight:
 external
 internal
Serial no.:
___________________
Rated value:
___________________
Class:
___________________
_________________________________________
Adjustment successful:
 yes
 no
_________________________________________
Inspector:
___________________
Signature:
___________________